Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z650 refresh...

Work in Progress

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#121 PostAuthor: MDM » Thu Aug 11, 2016 8:11 pm

Like I said earlier, to get some decent chain clearance I was going to have to notch the inside of the frame rails or give them a twatting with a big hammer. I chose the former, mainly because I didn't want to get too giddy with the hammer and end up breaking things. Again.
I'd wrapped masking tape around the frame rails when it was built up and with a chain in place, so I could see where I needed clearance. With it all stripped down, I cut a piece of 40mm square box section steel, and split in lengthways to get two pieces of C section.
I clamped a piece on the inside of the frame, parallel with the bracing added in a previous life, and marked it up for cutting.
Image
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#122 PostAuthor: MDM » Thu Aug 11, 2016 8:13 pm

Then I got the angle grinder and files out...
Image
And tried out one of the C section pieces for size, before marking it out and cutting it down to suit.
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#123 PostAuthor: MDM » Thu Aug 11, 2016 8:15 pm

And then proceded to do the same thing for the lower chain run.
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#124 PostAuthor: MDM » Fri Aug 12, 2016 9:15 am

And then I took the frame to Dave Dunlop at FastByMe turbo systems, so that he could do some welding which would be of far, far better quality and structural integrity than I will ever be able to manage...
Image
And the end result...
Image
Image
And he also blue-glued the shock extension pieces in place as well
Image
Now I need to clean the frame up and get some paint over it.
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

User avatar
ollie
Custard Cream
Custard Cream
Posts: 690
Joined: 13th Sep 2002
Location: north yorkshire

#125 PostAuthor: ollie » Fri Aug 12, 2016 11:51 am

some great work there and nice use of the paint stripper gun :lol: :up
zedsrus:"i don't know man ,i just got here myself !!"

sanderz
Custard Cream
Custard Cream
Posts: 847
Joined: 2nd Mar 2010
Location: Manchester

#126 PostAuthor: sanderz » Tue Aug 16, 2016 5:26 pm

Quality work all the way, top job :up
Wots up DOHC

User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#127 PostAuthor: Pigford » Wed Aug 17, 2016 5:07 pm

sanderz wrote:Quality work all the way, top job :up


+ 1 :twisted:
And on the 7th day... Zeds were created!

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#128 PostAuthor: MDM » Thu Aug 18, 2016 8:46 pm

Thanks fellas! :D
The frame ready for a coat or three of shiny black...
Image

And with that done, it was delicately slipped over the painted engine.
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#129 PostAuthor: MDM » Mon Aug 22, 2016 12:52 pm

I'd painted the original cast Mr Turbo plenum a few years ago (ahem), and it was looking rather scruffy, so with the engine now all black, I decided that the plenum could go back to the original finish, so started cleaning it up
Image
With the added side effect that the Mr Turbo logo would be highlighted
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

User avatar
Big Fluff
Hardcore
Hardcore
Posts: 2541
Joined: 1st Mar 2007
Location: Marbury, Shropshire

#130 PostAuthor: Big Fluff » Tue Aug 23, 2016 12:38 pm

Dave. If you want a set of 4 composite gaskets for the inlet to plenum chamber let me know and I'll drop a set off FOC mate. :wink:
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#131 PostAuthor: MDM » Tue Aug 23, 2016 2:17 pm

Funnily enough, that is exactly what I was looking for in the shed last night! If you could mate, that'd be greatly appreciated! ;-)
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#132 PostAuthor: MDM » Fri Aug 26, 2016 1:04 pm

Updates may get a little sporadic over the next few weeks as I'm having to pack stuff for a house move, but things will still get done as I need the bike to be in one lump for the move...
In the meantime, I popped over to see Keith at Nasty Paint in Birmingham to pick up my finished bodywork. Here's a sneaky peak...
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#133 PostAuthor: Pigford » Fri Aug 26, 2016 2:33 pm

Bling-king Hell .... that looks perty :party :pop
And on the 7th day... Zeds were created!

MDM
100Club
100Club
Posts: 249
Joined: 5th Mar 2008
Location: Lincolnshire Wolds

#134 PostAuthor: MDM » Mon Aug 29, 2016 9:11 pm

They say that the devil is in the details, so I got myself a replacement sidestand bolt in stainless, and gave it a taste of the polishing mop...
Image
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod

Is Vic There
Hardcore
Hardcore
Posts: 1285
Joined: 8th Nov 2011
Location: Brisbane, Australia.

#135 PostAuthor: Is Vic There » Mon Aug 29, 2016 10:21 pm

Nice work, great welding and the tank colour is stunning :D
Norton 850 Command, Harris Mag 2, Harris Mag 5, Triumph Steve McQueen, Suzuki RGV250 Barry Sheene, RG250 Walter Wolf, RD125LC, Lambretta Li150, Vespa 50N.


Return to “Projects”

Who is online

Users browsing this forum: No registered users and 21 guests