Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
UNLIMITED LTD - The Pigford Project
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- ZedHead
- Posts: 1128
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Dummy run with the JMC swingarm.....
Gap in frame is 235mm - swingarm is 215mm..... so 10mm spacers required each side. Also the original wheelbase is the same with it adjusted up to the max, with +125mm further adjustment as the chain wears
All lines up well, even the shock mounts are same spacing. Only thing is the rear footrest hangers are in the way So it'll be out with Mr Grinder at the weekend
Gap in frame is 235mm - swingarm is 215mm..... so 10mm spacers required each side. Also the original wheelbase is the same with it adjusted up to the max, with +125mm further adjustment as the chain wears
All lines up well, even the shock mounts are same spacing. Only thing is the rear footrest hangers are in the way So it'll be out with Mr Grinder at the weekend
And on the 7th day... Zeds were created!
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
- mick znone
- Hardcore
- Posts: 4473
- Joined: 13th Jun 2008
- Location: Cornwall
Thought I'd get a bit more time in the garage, but only had an hour or so..... had to reverse the brake arm but it's good to go
Also fitted the 33t sprocket - got a new front one to match 15t and a new chain ready to fit.
The yoke & handlebars are now swapped over with new r/hand switch gear...
Front end is complete with LTD fender & Teleflex brace...
Next is to sort out a stripped cam cap thread with a helicoil then I can start her up & get the 29mm Smoothies dialled in
Also fitted the 33t sprocket - got a new front one to match 15t and a new chain ready to fit.
The yoke & handlebars are now swapped over with new r/hand switch gear...
Front end is complete with LTD fender & Teleflex brace...
Next is to sort out a stripped cam cap thread with a helicoil then I can start her up & get the 29mm Smoothies dialled in
And on the 7th day... Zeds were created!
- coldsummer
- Hardcore
- Posts: 1896
- Joined: 29th Jun 2009
- Location: Berkeley
- coldsummer
- Hardcore
- Posts: 1896
- Joined: 29th Jun 2009
- Location: Berkeley
- coldsummer
- Hardcore
- Posts: 1896
- Joined: 29th Jun 2009
- Location: Berkeley
Who is online
Users browsing this forum: No registered users and 15 guests