Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Andy C new Z1000A1 project
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
- RALPHARAMA
- Area Rep.
- Posts: 2752
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Nice solid looking mill; better than my poxy little chinese crap! Trouble is I don't really have room for a proper mill, so I'm stuck with my little Warco
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
Re: Andy C new Z1000A1 project
Mmmmmm I believe there's a African A6 model that comes in Green, Red & Purple with Orange Vertical strips & it's a close call... but I think I'd prefer that.
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
Re: project
Love the Cooler work Andy ...real quality workmanship ...the machining & Stainless = Detail ! Also cooler lines over the Top of the motor ! Like you I have the same set up & I recon it's the way to go too ....as we know it keeps the Cooler primed/filled therefor oil to cams is almost instant instead on continually having to fill an empty massive void of 2 lines & a Cooler BEFORE the oil reaches the top end. I also run a clear Return line from my cooler so i can see whats actually happing . Cheers ..luv your work. Johny B
Who is online
Users browsing this forum: No registered users and 118 guests