Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
HowieD's 'arris
Moderators: chrisu, paul doran, Taffus, KeithZ1R
October 2013 update
Hello,
an update on Progress
Sorted out the Chain Tensioner thing, bought one from Monstercraft and here it is being fitted by Rob:
Had to ease the metal away a bit on the clamps to get a good fit around the welds and to miss the chain. The sprocket needs spacing out 6mm but that'll be it as a done deal -- £125 & £22 import duty !!
regards
Howie
an update on Progress
Sorted out the Chain Tensioner thing, bought one from Monstercraft and here it is being fitted by Rob:
Had to ease the metal away a bit on the clamps to get a good fit around the welds and to miss the chain. The sprocket needs spacing out 6mm but that'll be it as a done deal -- £125 & £22 import duty !!
regards
Howie
CD185, Maggot, Z1-R, Horace, Monster 620ie
-
- Custard Cream
- Posts: 919
- Joined: 1st Jul 2007
- Location: Oxfordshire
martinz1000r wrote:I need one of those for my Harris. Where did it come from?
Here:
http://www.monstercraftsman.com/clamp-o ... -sprocket/
had to pay £22 import duty though.
I had it a week after I ordered it.
regards
Howie
CD185, Maggot, Z1-R, Horace, Monster 620ie
Exhausting Progress
Greetings
here are some of the latest pictures from Rob:
The Silencer is only in a trial position and will be tightened in on the final sort out.
regards
Howie
here are some of the latest pictures from Rob:
The Silencer is only in a trial position and will be tightened in on the final sort out.
regards
Howie
CD185, Maggot, Z1-R, Horace, Monster 620ie
-
- 100Club
- Posts: 338
- Joined: 28th Mar 2013
- Location: Swindon Wiltshire
Exhaust
snotie1965 wrote:Looks lush , i would like a pic of the underside ,so i can see how you donr the pipe ?
I was up at the workshop today checking on progress and took loads of pictures and here is the first batch to answer this request.
Please note though that this is just a "fitting up" and tack welded there will be adjustments after the discussions today to make it fit cleaner & tighter.
CD185, Maggot, Z1-R, Horace, Monster 620ie
Progress July 2014
CD185, Maggot, Z1-R, Horace, Monster 620ie
Pigford wrote:Looking good lad
Also, put some vents in the electic tray to get some good air-flow
That's it for electrics under the tank ! its all digital and tiny signal wires - Motogadet stuff from Germany and all lives under the seat, or rather it will do once the plates are made up.
Only thing I have to think about Placing is the Regulator/Rectifier - I was thinking of here, like on this Phase One bike.:
CD185, Maggot, Z1-R, Horace, Monster 620ie
Who is online
Users browsing this forum: No registered users and 139 guests