Out on my Z1000A2 couple Sundays ago suffered a puncture at 70mph but safely brought it to a halt.
While waiting on the side of the motorway to be relayed home started to notice how scruffy and tatty it was looking after 11 years on the road after the last time i done it up so my mind was made up before i got home to tear it down and do it again but this time better and a few tweaks.
So this is where i am now my z in a million bits .
Picture of torque shows casting marks smoothed out to give the powder coating a smoother look.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
All because of a puncture
Moderators: chrisu, paul doran, Taffus, KeithZ1R
All because of a puncture
- Attachments
-
- 1488192466849-983880147.jpg (220.52 KiB) Viewed 3596 times
-
- 1488641844606-821136158.jpg (279.74 KiB) Viewed 3596 times
Last edited by mikey on Tue Mar 07, 2017 5:14 pm, edited 1 time in total.
Making the world a shiny place with a factory finish
Re: All because of a puncture
Whoops first pic wasnt meant to come out three times
Making the world a shiny place with a factory finish
Re: All because of a puncture
Pleased you are ok Mikey ,regards Gordon
Re: All because of a puncture
Thanks Gordon was bit scary at the time
BUt good exscuse to do something wiyh it
BUt good exscuse to do something wiyh it
Making the world a shiny place with a factory finish
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: All because of a puncture
Mikey,
I get the feeling you ain't doing shiney, or the factory finish.
I get the feeling you ain't doing shiney, or the factory finish.
Re: All because of a puncture
Definitely not factory finish steve
As for polishing the cases etc make a decision
on that when the motor comes back from buzzzard
As for polishing the cases etc make a decision
on that when the motor comes back from buzzzard
Making the world a shiny place with a factory finish
Who is online
Users browsing this forum: No registered users and 46 guests