Page 1 of 2

The Z900A4 I "stole"

Posted: Fri Nov 24, 2017 10:11 pm
Author: glav666
After 5 years I've decided to restore the Z900A4 i stole off my mate in 2012, I posted the story back then, but briefly, my mate owned the bike from about 1984 it was black with pink fish scales sorta painted on it (WTF). i remember the day he bought it. He diced it up a bit over the years until about 2000 when he parked it in his garage and his wife hung the washing on it. I tried with no avail to buy it. increasing my offer as the years went on.
In 2012 "bang" literally his boiler blew up and he phoned me to repair it. I told him he needed a new gas boiler instead of his old oil one and I would do it for mates rates of £1500, in short he had no money and after his wife nagging the shit out of him for a week the bike was delivered to my house with a note on it. get me some heat or my wife moving in with you.

The pictures are kind to the bike and over the last 5 years I've had lots of other projects to do, but the odd time I'd spend some time on the Zed. Engine has been stripped and vapour blasted, carbs been sonic cleaned and rebuilt, frame been stripped and repaired, (rotten shock mounts, anyone else had that problem?) and frame repainted.

I've been gathering parts up as budget allowed but am still short airbox and silencer (one fitted is a retro from Z power i think of an earlier model) and a standard swing arm, I'm going to build with the JMC at the moment and keep looking for a standard as I go.

When stripped the engine it had a big bore kit in it :) Rebored and redone crank and all bearing and bushings

Heres some photos of it when I got it, the pics are kind to it, Ill keep this thread going as I progress.

Glav[

Re: The Z900A4 I "stole"

Posted: Fri Nov 24, 2017 10:59 pm
Author: shep65
I'd f*ck them wheels off for starters.

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 8:54 am
Author: warren3200gt
shep65 wrote:I'd f*ck them wheels off for starters.


Why? what's wrong with 3 spoke CMA's? Got a set on a 650. (in Australia apparently!)

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 9:00 am
Author: glav666
3 spoke CMA's where too badly damaged, so they're long gone

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 9:07 am
Author: kev edwards
That's a CSR front mudguard on that.

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 9:23 am
Author: glav666
kev edwards wrote:That's a CSR front mudguard on that.

Is that good or bad ???

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 10:22 am
Author: Pigford
The CSR muddy is "square" and shite. The Z900/1000 LTD muddy's are nicer & do look good.

Your bike so enjoy :wink:

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 10:25 am
Author: warren3200gt
Depends if your going stock or not. Also looks like rear mudguard is gone and converted to a tail tidy.

Re: The Z900A4 I "stole"

Posted: Sat Nov 25, 2017 4:17 pm
Author: kev edwards
Pigford wrote:The CSR muddy is "square" and shite. The Z900/1000 LTD muddy's are nicer & do look good.

Your bike so enjoy :wink:

Nothing wrong with it just need to slot the front mounting holes to bring the front end down a bit, put one on my thou this week, and at £35 including postage from the States it looks even better.

Re: The Z900A4 I "stole"

Posted: Sun Nov 26, 2017 7:48 pm
Author: glav666
The Zed finally up on the bench, tell the kids I'll see them at Christmas for an hour

Re: The Z900A4 I "stole"

Posted: Mon Nov 27, 2017 12:44 pm
Author: SVENLEATHER
glav666 wrote:The Zed finally up on the bench, tell the kids I'll see them at Christmas for an hour



I like the anti theft device in the background.

Re: The Z900A4 I "stole"

Posted: Mon Nov 27, 2017 1:01 pm
Author: ZedHead
SVENLEATHER wrote:
glav666 wrote:The Zed finally up on the bench, tell the kids I'll see them at Christmas for an hour



I like the anti theft device in the background.


:shock:

Re: The Z900A4 I "stole"

Posted: Mon Nov 27, 2017 4:26 pm
Author: kev edwards
ZedHead wrote:
SVENLEATHER wrote:
glav666 wrote:The Zed finally up on the bench, tell the kids I'll see them at Christmas for an hour



I like the anti theft device in the background.


:shock:


It's not an anti theft device, it's an anti thief device, we should all have these sorts of devices.

Re: The Z900A4 I "stole"

Posted: Mon Nov 27, 2017 5:19 pm
Author: glav666
kev edwards wrote:
ZedHead wrote:
SVENLEATHER wrote:
glav666 wrote:The Zed finally up on the bench, tell the kids I'll see them at Christmas for an hour



I like the anti theft device in the background.


:shock:


It's not an anti theft device, it's an anti thief device, we should all have these sorts of devices.


I do live in Belfast, cops are still a bit iffy about guns

Re: The Z900A4 I "stole"

Posted: Sat Jan 13, 2018 3:25 pm
Author: glav666
Hi a bit of an update on my z900, I've now got the wheels on and barrels, and I am gonna finish fitting the valves etc on the head this weekend, bodywork going for paint this week when I get time to drill and retap the broken screws out of the tank badge threads.

The wheels are looking pretty good, but I didn't bother getting them rechromed as they are wrong codes, but are Tagasako rims. I didn't see the point as I will try and source correct rims in time, and the one fitted are perfectly service able although have a few marks on them.

I have made up a tool for the lath and hopefully it will work on my clocks to get the stainless ring crimped on. New clock faces by Big Fluff, many thanks, look great and backing all been zinced.