Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Mishmash Zed

Work in Progress

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
User avatar
zed1015
Hardcore
Hardcore
Posts: 3798
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

Re: Mishmash Zed

#16 PostAuthor: zed1015 » Fri Dec 29, 2017 12:30 pm

Those are accelerator pump carbs.
They may be 28's but also 26's
28's have 1 square diaphragm and the 26's have 2 ( 1 square and one triangular) on number 2 float bowl.
The location for the triangular one is un-machined with no cap on the 28's.
A pic of number 2 float bowl would confirm
I would un-blank the air screws and fit brass mains as they are more accurate than nylon.
Like for like brass and nylon do not flow the same amount of fuel.

saltflatracer
Regular Poster
Posts: 37
Joined: 21st Dec 2017
Location: By the sea in Dorset

Re: Mishmash Zed

#17 PostAuthor: saltflatracer » Sun Dec 31, 2017 1:11 pm

Here are some pics from today, got to drill & remove air screw blanking plugs & a pic of #2 carb bowl, I have measured the internal bore of the carbs & its 28mm.
Attachments
26114625_10215022495345908_6821050554434426892_o.jpg
26197744_10215022486785694_6651334180994457829_o.jpg
26060143_10215022460625040_8083114260314310141_o.jpg
26173527_10215022451944823_3783555638797379400_o.jpg


Return to “Projects”

Who is online

Users browsing this forum: No registered users and 29 guests