Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1B back from the dead

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
saltflatracer
Regular Poster
Posts: 20
Joined: 21st Dec 2017
Location: By the sea in Dorset

Re: Z1B back from the dead

#16 PostAuthor: saltflatracer » Sun Jan 07, 2018 2:48 pm

Did you get the frame checked at Maidstone Motoliner if so how much did they charge you ?

chrisw1
100Club
100Club
Posts: 124
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Z1B back from the dead

#17 PostAuthor: chrisw1 » Sun Jan 07, 2018 6:17 pm

saltflatracer wrote:Did you get the frame checked at Maidstone Motoliner if so how much did they charge you ?

I used a guy in St Helens .it was £150

saltflatracer
Regular Poster
Posts: 20
Joined: 21st Dec 2017
Location: By the sea in Dorset

Re: Z1B back from the dead

#18 PostAuthor: saltflatracer » Sun Jan 07, 2018 6:22 pm

thank you

chrisw1
100Club
100Club
Posts: 124
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Z1B back from the dead

#19 PostAuthor: chrisw1 » Sun Jan 07, 2018 9:05 pm

Good progress today .... bottom half of engine fitted , swing arm bushed and fitted , shocks on , forks and yokes etc in
Fitted the rear guard but forgot to fit the seat lock so had to take it all off again and do that , healamp bucket and indicator stems along with battery box etc
Made another list of parts that I forgot to get so will sort that this week
Oddly my caliper is a right one which means I might as well go for twin discs leaves me looking for a left and another disc or sell off the right and buy a repro left
I don't like the look of polished fork legs so had them vapour blasted and lacquered ..... not sure if I like them yet
Sorry for the picture quality its the fluorescents in the workshop
Attachments
proj 66.JPG
proj 66.JPG (75.92 KiB) Viewed 154 times
proj 65.JPG
proj 65.JPG (78.1 KiB) Viewed 154 times
proj 64.JPG
proj 64.JPG (88.56 KiB) Viewed 154 times
proj 63.JPG
proj 63.JPG (87.01 KiB) Viewed 154 times

User avatar
000zeds
Hardcore
Hardcore
Posts: 1259
Joined: 30th Dec 2005
Location: Kent

Re: Z1B back from the dead

#20 PostAuthor: 000zeds » Mon Jan 08, 2018 8:05 am

Sell off the right caliper + disc and buy the twin disc kit from Z-Power if you can afford it :idea:
Zeds-R-Us

User avatar
BigZCas
100Club
100Club
Posts: 302
Joined: 17th Dec 2016
Location: Bagworth, Leicestershire

Re: Z1B back from the dead

#21 PostAuthor: BigZCas » Mon Jan 08, 2018 1:14 pm

Hello Chris,
I had my fork legs ball burnished and then gave them a light CAREFUL rub with a ultra fine Scotch Brite pad.
Really like the finish, looks very similar to original but with no lacquer.

On another note: I'm not a fan of the indicators on the grab rail type, when you have the Z1 oval rear light, only my opinion :)
Last edited by BigZCas on Tue Jan 09, 2018 11:59 am, edited 3 times in total.
US 1978 Z1000a2, Luminous Green
UK 1974 Z1a 900, Candy Tone Brown/Orange

chrisw1
100Club
100Club
Posts: 124
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Z1B back from the dead

#22 PostAuthor: chrisw1 » Mon Jan 08, 2018 5:46 pm

Laced up the wheels with some after market rims .... I do have some original coded ones but the costs are getting away from me

Trueing them up and watching telly ....... very relaxing
Attachments
proj 67.JPG
proj 67.JPG (84.46 KiB) Viewed 113 times

User avatar
Pigford
I'm on prescription!!
Posts: 13760
Joined: 2nd Jan 2006
Location: North Dorset

Re: Z1B back from the dead

#23 PostAuthor: Pigford » Mon Jan 08, 2018 5:57 pm

What do you keep in the cellar?????

(trap door) :oops
And on the 7th day... Zeds were created!

chrisw1
100Club
100Club
Posts: 124
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Z1B back from the dead

#24 PostAuthor: chrisw1 » Mon Jan 08, 2018 8:05 pm

wheels trued up and assembled ...I used the same finish on the brake plate ( vapour and laquer )

I think it looks quite smart now
Attachments
proj 69.JPG
proj 69.JPG (89.34 KiB) Viewed 96 times
proj 68.JPG
proj 68.JPG (108.97 KiB) Viewed 96 times

User avatar
csx355
100Club
100Club
Posts: 185
Joined: 4th Dec 2015
Location: Cornwall

Re: Z1B back from the dead

#25 PostAuthor: csx355 » Mon Jan 08, 2018 10:55 pm

I'm with you all the way on the therapeutic qualities of wheel building. Built my rear wheel tonight courtesy of AdrianH and his rear hub.

Enjoyed watching this thread - it seems to be cracking on at a fair pace. Loving the in house garage shots.

chrisw1
100Club
100Club
Posts: 124
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: Z1B back from the dead

#26 PostAuthor: chrisw1 » Sun Jan 14, 2018 7:29 pm

Only had one free day to get in the workshop but made some progress
Rear guard fitted properly , footrests on , grab rail fitted , battery box fitted properly , front wheel and back wheel , tyres ,
I got a 2nd disc so need another caliper now ( more expense ) and opted for BT45 tyres
Sorted out all the engine parts so the head and barrels next
Sorry about the picture quality .....I lost the light and the fluorescents ruin the photos
Attachments
proj 74.JPG
proj 74.JPG (55.91 KiB) Viewed 41 times
proj 73.JPG
proj 73.JPG (92.35 KiB) Viewed 41 times
proj 72.JPG
proj 72.JPG (98.56 KiB) Viewed 41 times
proj 71.JPG
proj 71.JPG (83.69 KiB) Viewed 41 times

User avatar
BigZCas
100Club
100Club
Posts: 302
Joined: 17th Dec 2016
Location: Bagworth, Leicestershire

Re: Z1B back from the dead

#27 PostAuthor: BigZCas » Sun Jan 14, 2018 9:34 pm

Looking good Chris :D
US 1978 Z1000a2, Luminous Green
UK 1974 Z1a 900, Candy Tone Brown/Orange


Return to “Projects”

Who is online

Users browsing this forum: weaver and 4 guests