Page 1 of 4
Z1000H
Posted: Thu Jan 24, 2019 10:56 pm
Author: Swirl
Z1000H 1980 value, not been taxed since 1988
Any idea on value peeps, fuel injection all missing and blacked off, on carbs, wrong seat, no airbox, may have the opportunity to buy it.
Re: Z1000H value
Posted: Thu Jan 24, 2019 11:06 pm
Author: Ultim8pc
I'd say £1500 to £2000..
Re: Z1000H value
Posted: Thu Jan 24, 2019 11:14 pm
Author: Swirl
Ultim8pc wrote:I'd say £1500 to £2000..
Really in that condition
Re: Z1000H value
Posted: Thu Jan 24, 2019 11:15 pm
Author: Ultim8pc
Swirl wrote:Ultim8pc wrote:I'd say £1500 to £2000..
Really in that condition
Well, you asked!
Re: Z1000H value
Posted: Thu Jan 24, 2019 11:27 pm
Author: Swirl
Ultim8pc wrote:Swirl wrote:Ultim8pc wrote:I'd say £1500 to £2000..
Really in that condition
Well, you asked!
Do you know what swingarm is on it
Re: Z1000H value
Posted: Thu Jan 24, 2019 11:50 pm
Author: warren3200gt
Looks like a mod'd Dresda swing arm to me. I've one on a 650.
Re: Z1000H value
Posted: Fri Jan 25, 2019 5:20 am
Author: Philippe
Hi Swirl
I wouldn't pay more than 1500 £ for it. It's missing some vital parts that really makes it an H. Only the frame and engine numbers says it's an H. Nobody can see its an H when she's running on carbs. If you buy it to restore it I wish you all the best, just remember the H parts are very hard to find, it seems to me they're made of unobtanium !
GrtZ
Philippe
Re: Z1000H value
Posted: Fri Jan 25, 2019 8:11 am
Author: Swirl
Thanks for the input, Philippe
Re: Z1000H value
Posted: Fri Jan 25, 2019 8:32 am
Author: Ultim8pc
But it would make a great MK2...
Re: Z1000H value
Posted: Fri Jan 25, 2019 9:41 am
Author: KWACKERZ1
Mk2'S values are increasing and I paid for and sold a project one with less parts than that for more than 1500,
If you get it for less than 1800 you have done well, I would bid the seller a grand and see where you go.
(or pass me his details and I will
)
Re: Z1000H value
Posted: Fri Jan 25, 2019 10:51 am
Author: ADRIAN H
Ultim8pc wrote:I'd say £1500 to £2000..
About right.
Re: Z1000H value
Posted: Fri Jan 25, 2019 11:45 am
Author: samspoons
Is the gpz1100 b1 injection system similar?
Re: Z1000H value
Posted: Fri Jan 25, 2019 1:42 pm
Author: RALPHARAMA
I personally wouldn't give more than a grand for it as you'll need to spend some serious bucks on it to make it halfway nice. What you have there is effectively a MKII with lots of bits missing but H numbers? There's a lot of original bits missing if you wanted to make it standardish.
GPZ B FI is much better, but no where near the same. On the H it's called EFI and DFI on the later GPZ.
To be a proper H it would need the pukka injection system.
A very niche bike with a limited following compared to say a Z900A4.
Rob on here is a massive fan of them and has loads of them so might be able to help get parts for it if you decide to buy it. It's like a wooden boat - buying it is the cheap part
Re: Z1000H value
Posted: Fri Jan 25, 2019 2:36 pm
Author: walshyco
Not sure what swingarm that is but I don’t think it’s a modified one coz there’s one here in the first picture.
viewtopic.php?f=1&t=44474
Re: Z1000H value
Posted: Fri Jan 25, 2019 2:38 pm
Author: Swirl
I'm in negotiations, so watch this space