Page 3 of 4
Re: Z1a
Posted: Mon Feb 11, 2019 5:48 pm
Author: 8 Valve Mark
don't put them in upside down!
Re: Z1a
Posted: Mon Feb 11, 2019 6:07 pm
Author: Adrian90s
I'm not doing it! Can they put them upside down? Surely thread end at the nipple
Re: Z1a
Posted: Mon Feb 11, 2019 7:27 pm
Author: ADRIAN H
There are 2 different sets of spokes to both front and rear wheels - Inner and Outer spokes. One has approx 80 degree angle the other is around 100 degree angle (can’t remember which is which) but is easy to work out once you start. Just have to be careful you use them in correct place.
Re: Z1a
Posted: Mon Feb 11, 2019 7:48 pm
Author: ADRIAN H
Re: Z1a
Posted: Mon Feb 11, 2019 8:40 pm
Author: Adrian90s
Would the wheelbuilder know this? Any phone numbers for Leeds area guys
Re: Z1a
Posted: Mon Feb 11, 2019 9:35 pm
Author: ADRIAN H
Re: Z1a
Posted: Mon Feb 11, 2019 11:06 pm
Author: Adrian90s
Thanks Adrian
Most helpful
Re: Z1a
Posted: Tue Feb 12, 2019 8:56 am
Author: ADRIAN H
Adrian90s wrote:Thanks Adrian
Most helpful
It's part of my homework, as I have a front and rear wheel to re-spoke once I get my rims back.
Just sent them off to Ash @ Yorkshire M=etal Finishers Ltd.
Re: Z1a
Posted: Tue Feb 12, 2019 5:37 pm
Author: ADRIAN H
ADRIAN H wrote:Adrian90s wrote:Thanks Adrian
Most helpful
It's part of my homework, as I have a front and rear wheel to re-spoke once I get my rims back.
Just sent them off to Ash @ Yorkshire Metal Finishers Ltd.
Re: Z1a
Posted: Tue Feb 12, 2019 6:30 pm
Author: Adrian90s
Who is doing the Respoke Adrian? Need my back wheel doing.
Cheers
Re: Z1a
Posted: Tue Feb 12, 2019 7:01 pm
Author: ADRIAN H
Probably me, unless I can get a guy I know local to me to sort them out.
Central wheels have got a good reputation.
https://www.central-wheel.co.uk/service ... lding.htmlAs have Hagon
https://www.hagon-shocks.co.uk/
Re: Z1a
Posted: Tue Feb 12, 2019 7:18 pm
Author: ADRIAN H
You could pm (rob) zed1015 And ask him who he uses he’s in Goole ?
Link to page he has posted on
viewtopic.php?f=4&t=44515&p=370870#p370870Might be an idea, to put a thread in the BIKE HELP section.
Re: Z1a
Posted: Tue Feb 12, 2019 10:11 pm
Author: Adrian90s
Thanks again Adrian
Re: Z1a
Posted: Wed Feb 13, 2019 7:18 pm
Author: BigZCas
I used Central Wheel Components, B46 1HT. for my Z1a and Z900.
Great job, £60 a wheel.
I gave them plated spokes that were supplied by Dave @ Saisei, and re-chromed rims
Cetral also fitted tyres from their sister company Wheelhouse
Re: Z1a
Posted: Fri Mar 22, 2019 5:06 pm
Author: Adrian90s
Well now it's a Z1 according to the jap owners dating letter..progress on the back end and I'm quite pleased.