The idea was for an aircooled trackday bike.
Thought I would share a few pics.
Started out with a frame and had a Zx6r wheels swing arm grafted onto it along with zzr forks and yokes.
The idea was to keep z650 dimensions and standard frame and squeeze in a different engine I had from our good friend Jack (rip) a while ago. We know its a good motor as we ran it at spa a couple of years back.
I set the shock mounts to take 350mm z1 shocks as I had some already. We also set the ride height to mimic the standard 650.
Note I had also removed the bottom engine mounts as they clash with the motor.
Just to make sure we trial fitted a fully built one as well.
attachment=1]IMG_5202.jpeg[/attachment]
Along with some other trial bits and pieces before we started on the frame mods.
We then braced the frame and re-added lower mounts for the engine and mounting points for rearsets.
Frame was then powder coated[
Note lower mounts added into frame rails to support engine lower mount. ( i have seen people not bother with these when fitting these engines in z frames but I wanted them fitted if possible )
