Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
a4 poject rebuild
Moderators: paul doran, Taffus, KeithZ1R, chrisu
a4 poject rebuild
Stable Mate
http://i372.photobucket.com/albums/oo17 ... G_3667.jpg[/IMG]
TOP C/CASE
I am pointing at the part i need help with - what way it the rachet part of the kick start to be fitted?
Oil seal - I have the flat part into to the casing??
http://i372.photobucket.com/albums/oo17 ... G_3667.jpg[/IMG]
TOP C/CASE
I am pointing at the part i need help with - what way it the rachet part of the kick start to be fitted?
Oil seal - I have the flat part into to the casing??
Last edited by Liam Crowe on Tue Dec 02, 2008 9:34 pm, edited 1 time in total.
-
- Hardcore
- Posts: 1630
- Joined: 28th Mar 2003
- Location: Warwickshire
a4 project rebuild
Hi Everybody,
I will get my Triumph out and will post picks.
Any help with the photos
Liam
I will get my Triumph out and will post picks.
Any help with the photos
Liam
-
- ZedHead
- Posts: 1166
- Joined: 18th Mar 2007
- Location: Southampton
The oil seal is correct and the ratchet is correct, if you had the kickstart shaft dismantled make sure that the marks on the shaft and the ratchet are aligned. Also I cant see the washer tabs on the photo but make sure they are there and bent into place it should be renewed ideally and use some thread lock on the bolts.
a4 project rebuild
Good Morning Lad's
Thanks very much for the advice.
On the Triumph - very Sorry no money will make me part with her - well nearly no money
Can i put the bottom end back togother leaving out the return spring and spacer in the kick start shaft - Kick start shaft was not dismantled so that should be O.K and the bolts will get some therad lock also
Oil seal advice is understood and thanks
What sealer would be put with the gasket when putting the two casing ends together
Liam
Thanks very much for the advice.
On the Triumph - very Sorry no money will make me part with her - well nearly no money
Can i put the bottom end back togother leaving out the return spring and spacer in the kick start shaft - Kick start shaft was not dismantled so that should be O.K and the bolts will get some therad lock also
Oil seal advice is understood and thanks
What sealer would be put with the gasket when putting the two casing ends together
Liam
- DogsbolloxofZ1B
- Hardcore
- Posts: 1440
- Joined: 28th Feb 2006
- Location: Near Chichester
Who is online
Users browsing this forum: No registered users and 152 guests