Philbike wrote:just thought who would someone go to the trouble of wiring hazards?
If you're going abroad, (especially in France), you need hazards fitted.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Kz650
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Kz650
If you're going abroad, (especially in France), you need hazards fitted.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: Kz650
Hi,the handle bars must have been changed in the past,all switch wire is on the outside..
The flasher unit is behind the side panel and works.
I can hopefully send some pictures in later,but at the moment I am in the process of
fitting a new camshaft cover gasket which has started to leak after a top half rebuild.
On the plus side the bike ran fine with no smoke on start up, ended up renewing,
New rings
Honed bores
New valve guides
New seals
Replace 3 buckets and one valve.
The flasher unit is behind the side panel and works.
I can hopefully send some pictures in later,but at the moment I am in the process of
fitting a new camshaft cover gasket which has started to leak after a top half rebuild.
On the plus side the bike ran fine with no smoke on start up, ended up renewing,
New rings
Honed bores
New valve guides
New seals
Replace 3 buckets and one valve.
Who is online
Users browsing this forum: No registered users and 13 guests