Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000 A1

Work in Progress

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

Z1000 A1

#1 PostAuthor: Mark Tiller » Thu Jun 16, 2011 2:38 pm

This was my first Zed bought in 79
Image
I owned this one for 20 yrs but sold it against the advice of the advice of the wife!
Image
After a brief mid life crisis with this......
Image
I Bought this bike back in Jan, 6mths tax and full MOT from Chesterfield and rode it back home to Stewkley between the snow showers...
Image
Image
It dissapeared into the shed for some pre summer modding including a tailtidy from Hobbo which i changed the light fixing method.
Image
New Z1 tailpiece and panels from Jerry and a light from Zpower and KH indicators with short stems and the seat recovered by Steve Adams
Image
I had the Black/silver number plate on for a while but after a polite warning went to a yellow one.
Last edited by Mark Tiller on Sun Jun 19, 2011 10:00 pm, edited 1 time in total.
07962421462

User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

#2 PostAuthor: Mark Tiller » Thu Jun 16, 2011 2:59 pm

Dyna S and new plugs gave the engine a lift, Tank was fitted with a Newton aero filler and a breather in the front inner edge of the tank with the vent pipe running up to the left bar and the whole lot set a mile down to Roadrash paintwork for Imperial blue and decals instead of the standard cast badges, and new shox fro M&P.
Image
Image
Image
Out of the shed and a spin to the Ace to meet some of you...
Image
07962421462

User avatar
knut
100Club
100Club
Posts: 302
Joined: 24th Jun 2007
Location: cork,Ireland

#3 PostAuthor: knut » Thu Jun 16, 2011 3:15 pm

well done mark she,s a beauty,glad you got over the harley thing :lol:
i like the exhaust,what make is it ?
what,s there to say except we,re all mad on here.

User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

#4 PostAuthor: Mark Tiller » Thu Jun 16, 2011 4:39 pm

Tarozzi rearsets fitted together with updated rears...
Image
Image
Image
Met up with a few at the Englands Rose for a Bucks meet....
Image
07962421462

User avatar
mikey
Hardcore
Hardcore
Posts: 2636
Joined: 29th Nov 2005
Location: bristol

#5 PostAuthor: mikey » Thu Jun 16, 2011 6:17 pm

Love that colour mark its gorgeous as is the whole bike
Making the world a shiny place with a factory finish

User avatar
paul doran
Area Rep.
Area Rep.
Posts: 9139
Joined: 24th Sep 2004
Location: near Dublin Ireland

#6 PostAuthor: paul doran » Thu Jun 16, 2011 7:20 pm

lovely Z thou well done
way too many Zeds

User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

#7 PostAuthor: Mark Tiller » Sat Jun 18, 2011 2:02 pm

Knut...the exhaust is a Kerker (old one i think as it came with the bike) i had to trim about 1 1/2" off the rear to get rid of a scuff. Makes a great noise but it will be replaced with a 4:2 that Exaustcraft is making a prototype for.
Cheers also Mikey and Paul for the positive comments.

As its a toss up between either taking up canoeing or donning a frogman suit due to rain (bloody El nino) i have been in the shed again....

Fork Brace and matching mudguard fitted..

Image

Image

Image

next on the list is a JMC i i got new from Ebay, i think ill get it powdercoated black before fitting
07962421462

User avatar
ollie
Custard Cream
Custard Cream
Posts: 690
Joined: 13th Sep 2002
Location: north yorkshire

#8 PostAuthor: ollie » Sat Jun 18, 2011 11:06 pm

mmmmm looking great mark ,doin a fine job :wink:
zedsrus:"i don't know man ,i just got here myself !!"

User avatar
mikey
Hardcore
Hardcore
Posts: 2636
Joined: 29th Nov 2005
Location: bristol

#9 PostAuthor: mikey » Sat Jun 18, 2011 11:33 pm

Looking better all the time mark only thing that distracts from it
is the dancing cowgirl, shes mesmerising :hoo
Making the world a shiny place with a factory finish

Jappen
100Club
100Club
Posts: 338
Joined: 23rd Jun 2008
Location: Norway

#10 PostAuthor: Jappen » Sun Jun 19, 2011 1:11 pm

Mark Tiller wrote:Knut...the exhaust is a Kerker (old one i think as it came with the bike) i had to trim about 1 1/2" off the rear to get rid of a scuff. Makes a great noise but it will be replaced with a 4:2 that Exaustcraft is making a prototype for.
Cheers also Mikey and Paul for the positive comments.

As its a toss up between either taking up canoeing or donning a frogman suit due to rain (bloody El nino) i have been in the shed again....

Fork Brace and matching mudguard fitted..

Image

Image

Image

next on the list is a JMC i i got new from Ebay, i think ill get it powdercoated black before fitting


Real nice bike :!: :D
Here you have one in black
80-Z1000H
79-Z1000MK2

Jappen
100Club
100Club
Posts: 338
Joined: 23rd Jun 2008
Location: Norway

#11 PostAuthor: Jappen » Sun Jun 19, 2011 1:12 pm

Image
80-Z1000H

79-Z1000MK2

User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

#12 PostAuthor: Mark Tiller » Sun Jun 19, 2011 1:43 pm

That looks great Jappen, suits the style of the Zed more than bare alloy i think
07962421462

Jappen
100Club
100Club
Posts: 338
Joined: 23rd Jun 2008
Location: Norway

#13 PostAuthor: Jappen » Sun Jun 19, 2011 2:30 pm

Mark Tiller wrote:That looks great Jappen, suits the style of the Zed more than bare alloy i think


Agree,it looks a little bit more :twisted: ... :D
80-Z1000H

79-Z1000MK2

User avatar
ade woollams
100Club
100Club
Posts: 377
Joined: 5th Mar 2007
Location: within the smoke n the burnout zone
Contact:

#14 PostAuthor: ade woollams » Sun Jun 19, 2011 3:25 pm

mmmmmmmmmmmmmmmmmmmm.sorry not my cup of zeee.as it was with a chrome kerker would have done it for me
dragracing, because it takes more than one ball !!!!!!!!!!!!!!!

http://www.youtube.com/watch?v=pNoktjNP ... ture=share

Jappen
100Club
100Club
Posts: 338
Joined: 23rd Jun 2008
Location: Norway

#15 PostAuthor: Jappen » Sun Jun 19, 2011 9:27 pm

ade woollams wrote:mmmmmmmmmmmmmmmmmmmm.sorry not my cup of zeee.as it was with a chrome kerker would have done it for me


Someone like a warm cup of zeee someone likes it cold.Whould be boring to look at the same taste all the time or what :?: :D
80-Z1000H

79-Z1000MK2


Return to “Projects”

Who is online

Users browsing this forum: No registered users and 27 guests