z650 rear drum wheel

[ash]

Now this is a maybe but putting this on just incase someone has one
18 inch

[Taffus]

alloy or spoked?

[ash]

Mark alloy mate, not 100% yet but its a maybe, gonna check in a bit think mines got a slight buckle,

[ash]

Mark had a good check of the back wheel and it aint buckled which im happy about, thanks for your feedback mate
Did you say you had spoked wheels also,

[Taffus]

set of kawasaki alloys and a set of cma's

[ash]

Mark the cma,s are alloys aint they

[Taffus]

Yes, paid a lot for then too!

[ash]

Ok mate, wouldnt mind some spokes but goto see how things go, did you see my carb thread

[gray]

Just looked in the garage , I've a rear drum /spoked wheel that i think's off a 650. got it in a job lot with a z650B3 project which is now gone
18" diam, 2.15x18 rimsize stamped on the rim
17mm diam axle
"usable range" casting on the brake backplate
42 teeth on the sprocket. 6 bolt sprocket carrier.
drum diam looks like 178mm.
will need respoked (rusty) and new rim ( hefty tyre lever marks or something) and blasted/polished.
complete with axle, nut and spacers,
and chain adjusters possibly if i can find them

[gray]

Just looked in the garage , I've a rear drum /spoked wheel that i think's off a 650. got it in a job lot with a z650B3 project which is now gone
18" diam, 2.15x18 rimsize stamped on the rim
17mm diam axle
"usable range" casting on the brake backplate
42 teeth on the sprocket. 6 bolt sprocket carrier.
drum diam looks like 178mm.
will need respoked (rusty) and new rim ( hefty tyre lever marks or something) and blasted/polished.
complete with axle, nut and spacers,
and chain adjusters possibly if i can find them

[malc87]

Got this?