hello gents i removed the generator cover from my gpz1100 A1 to paint it. i put it back on today put the oil back in it started fine but every so often a rattling noise will come from that area has anyone got any ideas what i could have done wrong.it seemed to go back on ok.
many thanks in advance john
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
generator noise
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Did you remove the stator wire holding clip?
If so did it go back in with the bottom end of it tucked behind the two little cast bosses on the casing?
If not it will rub the outside of the stator and make a rubbing or tinkling sound.
You'll see it if you take it off again as it will have a shiny mark on the rotor's outer casing.
AL
If so did it go back in with the bottom end of it tucked behind the two little cast bosses on the casing?
If not it will rub the outside of the stator and make a rubbing or tinkling sound.
You'll see it if you take it off again as it will have a shiny mark on the rotor's outer casing.
AL
1981 J1
zorded wrote:Did you remove the stator wire holding clip?
If so did it go back in with the bottom end of it tucked behind the two little cast bosses on the casing?
If not it will rub the outside of the stator and make a rubbing or tinkling sound.
You'll see it if you take it off again as it will have a shiny mark on the rotor's outer casing.
AL
Yep, Al (Zorded) sorted mine out this way
Who is online
Users browsing this forum: celger7 and 41 guests