Green/white wire splits to 2 blue for each bulb & black/yellow splits to black/yellow for each bulb !
Any pointers on this would be appreciated
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
RevCounter lights not working
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
fusionpaul
- 100Club
- Posts: 142
- Joined: 24th May 2013
- Location: hindhead
RevCounter lights not working
Noticed the other night that i have no lights on the rev counter, thought it would be a case of just changing the bulbs ! On closer inspection both bulbs look ok however there are 4 wires coming from the harness, Brown & Blue are redundant !
Green/white wire splits to 2 blue for each bulb & black/yellow splits to black/yellow for each bulb !
Any pointers on this would be appreciated
Green/white wire splits to 2 blue for each bulb & black/yellow splits to black/yellow for each bulb !
Any pointers on this would be appreciated
-
fusionpaul
- 100Club
- Posts: 142
- Joined: 24th May 2013
- Location: hindhead
Having checked wiring diagram it looks like i must have a later harness as the tacho with the brake light failure bulb has 4 wires & mine doesnt have this light !!! So looks like it was wired up incorrectly, what i can make out from the diagram is mine should be using the blue & black/yellow wires only 
-
fusionpaul
- 100Club
- Posts: 142
- Joined: 24th May 2013
- Location: hindhead
Sorted
All sorted with a bit of solder & heat shrink & not forgetting
a wiring diagram
a wiring diagram
Who is online
Users browsing this forum: No registered users and 35 guests