Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1R Fuel Tap

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Tonka
Custard Cream
Custard Cream
Posts: 910
Joined: 11th Jun 2011
Location: In a pub in Warwick with a bit of luck

Z1R Fuel Tap

#1 PostAuthor: Tonka » Sat Sep 14, 2013 2:59 pm

Need a new or working fuel tap for a Z1R as the one fitted to the bike is extremely difficult to turn on and off.

Also the filter is past it's best anyway so best to replace it

Cheers
Inheritance? What inheritance? He spent it all on booze, women and Zed parts!
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4690
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Sat Sep 14, 2013 7:36 pm

https://www.z-power.co.uk/merchantmanag ... ts_id=1851



http://www.ebay.com.au/itm/Fuel-Gas-Pet ... 0503018186


http://www.ebay.co.uk/itm/KAWASAKI-Z-10 ... d=ViewItem

http://www.motorparts.nl/index.php?main ... bfivq4ca13
Top
User avatar
Tonka
Custard Cream
Custard Cream
Posts: 910
Joined: 11th Jun 2011
Location: In a pub in Warwick with a bit of luck

#3 PostAuthor: Tonka » Sat Sep 14, 2013 8:21 pm

Many thanks Paul, ordered one from the 3rd choice you gave me. Cheers
Inheritance? What inheritance? He spent it all on booze, women and Zed parts!
Top
DavidZ1R
Hardcore
Hardcore
Posts: 1513
Joined: 12th Jun 2011
Location: Bolton Lancs

#4 PostAuthor: DavidZ1R » Sun Sep 15, 2013 8:59 am

Hi Tonka, I have had the same problem on mine, posted a couple years ago, not alone either, I think its the fuel, stripped mine down, replaced the o ring seal, lubricated it and it was much better, still is but tight, no point now you have bought one. :)
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4690
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#5 PostAuthor: z1bman » Sun Sep 15, 2013 12:20 pm

these type of fuel taps where very stiff to operate even from new
Top
Gavin
Custard Cream
Custard Cream
Posts: 871
Joined: 11th Jun 2011
Location: Scunthorpe

#6 PostAuthor: Gavin » Sun Sep 15, 2013 12:32 pm

This is a problem on Z1300's I am going to follow this As it works and cheaper than buying a new tap

Taken from the Z1300 forum

http://www.dreadsbikersite.com/Z1300/fuel_tap.htm
Z1000 MK2
Z1300 DFI
Top
User avatar
KeithZ1R
Moderator
Posts: 3070
Joined: 15th May 2005
Location: Bury

#7 PostAuthor: KeithZ1R » Sun Sep 15, 2013 3:32 pm

Pull it apart and clean it put a bit of silicon on the "O" ring DONT lose the little spring that pushes the cone into the housing :oops:
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 21 guests