Option A: Weld a 6mm thick washer to the outside of the existing spacer.
Option B: Fabricate a new spacer. (It is 40mm at its largest diameter).
This is the existing spacer. What do you think?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wheel spacer
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Wheel spacer
I would welcome suggestions as to the easiest and best way to space the front wheel on my project.
Option A: Weld a 6mm thick washer to the outside of the existing spacer.
Option B: Fabricate a new spacer. (It is 40mm at its largest diameter).
This is the existing spacer. What do you think?
Option A: Weld a 6mm thick washer to the outside of the existing spacer.
Option B: Fabricate a new spacer. (It is 40mm at its largest diameter).
This is the existing spacer. What do you think?
Asphalt Cowboy Z1100R, 1981 Z1000J
-
PaulMceleney
- Chunks
- Posts: 568
- Joined: 29th Jan 2008
- Location: milton keynes
Who is online
Users browsing this forum: No registered users and 45 guests