Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

CR 33's too big for a z1000 ?

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
rpeters
Bristol's "H" Hoarder
Posts: 828
Joined: 11th Jun 2011
Location: Bristol

#16 PostAuthor: rpeters » Thu Oct 20, 2016 5:46 am

I have polished metmachex and JMC 7020 deep brace swing arms for sale if you are interested??

Rob
paid up member
Top
User avatar
mike_p
100Club
100Club
Posts: 268
Joined: 13th Jan 2013
Location: North Yorkshire
Contact:
Contact mike_p

#17 PostAuthor: mike_p » Thu Oct 20, 2016 6:06 am

Cheers Rob I'm very interested yes. Have sent you a PM
Cheers Mike
Top
Is Vic There
Hardcore
Hardcore
Posts: 1285
Joined: 8th Nov 2011
Location: Brisbane, Australia.

#18 PostAuthor: Is Vic There » Thu Oct 20, 2016 9:59 am

Mike, I don't have a clue what they are worth in the Northern Hemisphere, what do you think is a fair price?
Norton 850 Command, Harris Mag 2, Harris Mag 5, Triumph Steve McQueen, Suzuki RGV250 Barry Sheene, RG250 Walter Wolf, RD125LC, Lambretta Li150, Vespa 50N.
Top
User avatar
mike_p
100Club
100Club
Posts: 268
Joined: 13th Jan 2013
Location: North Yorkshire
Contact:
Contact mike_p

#19 PostAuthor: mike_p » Thu Oct 20, 2016 5:40 pm

Is Vic There wrote:Mike, I don't have a clue what they are worth in the Northern Hemisphere, what do you think is a fair price?


Thanks a lot for the offer of the shocks......I've had a member from the same county as me in the UK offer me a decent set for a fair price so I'd be daft really not to take it up
Cheers again though :D
Top
Is Vic There
Hardcore
Hardcore
Posts: 1285
Joined: 8th Nov 2011
Location: Brisbane, Australia.

#20 PostAuthor: Is Vic There » Thu Oct 20, 2016 7:08 pm

Totally understand, the P&P would have been a tad on the expensive side.
Norton 850 Command, Harris Mag 2, Harris Mag 5, Triumph Steve McQueen, Suzuki RGV250 Barry Sheene, RG250 Walter Wolf, RD125LC, Lambretta Li150, Vespa 50N.
Top
HowieD
100Club
100Club
Posts: 367
Joined: 5th Feb 2008
Location: Lincoln

#21 PostAuthor: HowieD » Tue Oct 25, 2016 4:00 pm

So where is a good place to buy CR31's in the UK ???


Looking for something for Horace Engine #2 which will be 1075 when its finished.

H :D wie
CD185, Maggot, Z1-R, Horace, Monster 620ie
Top
martinz1000r
Custard Cream
Custard Cream
Posts: 919
Joined: 1st Jul 2007
Location: Oxfordshire

#22 PostAuthor: martinz1000r » Wed Oct 26, 2016 11:14 am

Allens Performance is main dealer. Dave at Saisei did a better price (marginally) last set I bought. Chris at Grumpy1260 can also source.

In the past I bought direct from Japan but given our currency is now worth less than chocolate money by the time you factor in shipping, duties etc you will be better off with local supplier.

Budget about £800 based on my last set.(CR33)
Z1000R, Moto Martin GPz, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, SP1 Hoonda x 2, Katana 1100, Bimota SB6R and Tuatara
Top
User avatar
mike_p
100Club
100Club
Posts: 268
Joined: 13th Jan 2013
Location: North Yorkshire
Contact:
Contact mike_p

#23 PostAuthor: mike_p » Wed Oct 26, 2016 11:41 am

Bought a few pairs from Allens over the years but the last quote I got from them had gone through the roof.....it was about £1200 for 33's . I bought a new set of 33's relatively recently from that suzukiusedspares ebayer for £785
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 45 guests