Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Disc rotor skimming
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Disc rotor skimming
Hi All,can anyone point me in the right direction for having some brake rotors skimmed or surface ground,pref West Mids or close..Ta
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-
warren3200gt
- Hardcore
- Posts: 3047
- Joined: 13th Jun 2014
- Location: Dartford Kent
http://www.thurstonengineering.co.uk/
Not quite midlands but the best there is. Dont have them lathe skimmed cos they flex and youll never get them flat and they will shudder. Go ground. Had 2 discs done for £90.00.
perfect finish.
Not quite midlands but the best there is. Dont have them lathe skimmed cos they flex and youll never get them flat and they will shudder. Go ground. Had 2 discs done for £90.00.
perfect finish.
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
-
wilsonsjw11
- Hardcore
- Posts: 1357
- Joined: 18th Jul 2008
- Location: Derbyshire/London
-
wilsonsjw11
- Hardcore
- Posts: 1357
- Joined: 18th Jul 2008
- Location: Derbyshire/London
Coventry Boring surface ground 2 discs for me from a Z1B but used too coarse a cut and F**ked them.
They were ok at slow speed but chattered excessively when braking from speed.
Al Marshall tried to take the coarse finish out for me but it didn't cure the problem and the discs ended up very close to the service limit.
I have now got 2 NOS discs on the bike and the breaking is good and also no squeals.
Regards
Steve.
They were ok at slow speed but chattered excessively when braking from speed.
Al Marshall tried to take the coarse finish out for me but it didn't cure the problem and the discs ended up very close to the service limit.
I have now got 2 NOS discs on the bike and the breaking is good and also no squeals.
Regards
Steve.
Who is online
Users browsing this forum: No registered users and 59 guests