Z1000-A1 Handlebars

[DogsbolloxofZ1B]

Does anyone have or know where I can buy a
genuine set of stock handlebars for a Z1000-A1?
Doing another restoration😳

Cheers Mike

[000zeds]

I did get a set from Z-Power but it was many years back but you never know your luck

[wilsonsjw11]

Mike,
Do the Z1000A1 handlebars have the hole in them to retain the right hand switch gear as I have a set that are exactly as Z1 but minus the locating hole.
Regards
Steve

[z1bman]

https://www.z-power.co.uk/merchantmanag ... ts_id=2188

[wilsonsjw11]

Mike,
Looking at images on the Zpower link the ones I have are definitely not Z1000A1.
Regards
Steve

[DogsbolloxofZ1B]

Mike,
Looking at images on the Zpower link the ones I have are definitely not Z1000A1.
Regards
Steve

Hi Steve,
Thanks for checking. Z1Bman has posted a link to
them on Daves website.
cheers Mike

[DogsbolloxofZ1B]

https://www.z-power.co.uk/merchantmanager/product_info.php?products_id=2188

Thanks. I couldn't fibd them on the site when I checked.

Cheers Mike

[becker]

If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?

[DogsbolloxofZ1B]

If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?

Hi Becker,
Thanks I'd def like them. Please let me know
cost inc postage to PO18 8UQ

Cheers Mike

[becker]

If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?

Hi Becker,
Thanks I'd def like them. Please let me know
cost inc postage to PO18 8UQ

Cheers Mike

Mike,

Some photos of the handlebars I have - can't remember which was the Z1000 - think its the ones with the drilled holes in - chrome is good condition and both are straight as far as I can tell - you can have either - shall we say £15+£5 p+p?

[z1bman]

If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?

Hi Becker,
Thanks I'd def like them. Please let me know
cost inc postage to PO18 8UQ

Cheers Mike

Mike,

Some photos of the handlebars I have - can't remember which was the Z1000 - think its the ones with the drilled holes in - chrome is good condition and both are straight as far as I can tell - you can have either - shall we say £15+£5 p+p?

those don.t appear to have the hole between the handlebar clamps the switch wiring exits from ? or the entry of the wiring from the switch? the hole that is shown in the photo is to locate the switch

[8 Valve Mark]

I'll take a pair Becker, whichever ones mike doesn't go for.. cheers mark[/b]

[tlc]

A1 bars have an extra section in the middle to reinforce where the hole for the wiring comes out.

[z1bman]

this is what they should look like


http://www.ebay.it/itm/301806357168

[DogsbolloxofZ1B]

this is what they should look like


http://www.ebay.it/itm/301806357168

I thought there was something missing.. getting old😄
Absolutely right they should have that thicker mid section.
Dohhhh