Just thought I'd ask here!
I need the following to fit the 4-2 exhaust to the Z1000R and before I buy some from CMSNL and pay a small fortune (nearly the same cost as the parts) wondered if there is anyone on here that might have them or could point me in the right (and cheaper) direction!
2 x 131J1055 10x55 black flanged bolt
2 x KA00204082 cup washer
4 x KA00219856 Rubber bushing
Thanks in advance
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Exhaust bolts
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Is Vic There
- Hardcore
- Posts: 1285
- Joined: 8th Nov 2011
- Location: Brisbane, Australia.
Exhaust bolts
Norton 850 Command, Harris Mag 2, Harris Mag 5, Triumph Steve McQueen, Suzuki RGV250 Barry Sheene, RG250 Walter Wolf, RD125LC, Lambretta Li150, Vespa 50N.
Re: Exhaust bolts
Have you asked on kz1000r.com
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: Exhaust bolts
ADRIAN H wrote:Have you asked on kz1000r.com
I think that site is shut down unless anyone knows different.
LE to JOG on a z900
P.U.M.
P.U.M.
-
trikerdrew
- 100Club
- Posts: 221
- Joined: 30th Nov 2007
- Location: leicester,uk
Re: Exhaust bolts
I always use stainless studs and brass nuts.
Why brass nuts? Because they strip easier than the studs will
Unless you are going factory, in which case that is of no help,LOL!
drew
Why brass nuts? Because they strip easier than the studs will
Unless you are going factory, in which case that is of no help,LOL!
drew
Who is online
Users browsing this forum: No registered users and 21 guests