Yes, The thread starts at a depth of 10mm
Will give them a call thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Fork Tops
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Fork Tops
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
-
kev edwards
- Hardcore
- Posts: 2148
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Fork Tops
z1bman wrote:i am sure the thread on the a1 fork tube is set deeper than the a2 the a2 thread comes nearly close to the top of of the fork tube where the a1 is set about 15mm below the top of the fork tube. the fork tops you have purchased are probably from an early gpz600 which have a similar fork top but they use 37 mm diameter forks. try john browse in wrexham he will know the part you are looking for
The thread on the A2 and D1 is set about 15mm down in tube I have just replaced my Stanchions with a set from Z-power.
Who is online
Users browsing this forum: No registered users and 28 guests