Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

GPZ11 Z1000J etc. liner/std barrels needed

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

GPZ11 Z1000J etc. liner/std barrels needed

#1 PostAuthor: KWACKERZ1 » Fri Nov 10, 2017 1:15 pm

Looking for a standard liner to replace one liner and 1170 piston that has damage to it.

Will consider anything with at least one standard size liner as it will be bored to 1170 anyway.

Can anyone help?

Also if anyone has an 1170 wiseco new high comp piston kicking about give us a shout.

Cheers.

Julian_Boolean
Custard Cream
Custard Cream
Posts: 804
Joined: 20th Oct 2016
Location: Ipswich

Re: GPZ11 Z1000J etc. liner/std barrels needed

#2 PostAuthor: Julian_Boolean » Fri Nov 10, 2017 1:50 pm

Doesn't it have to be an 1100 barrel to be bored to 75mm, I don't think you can go that big with 1000J barrels.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

Re: GPZ11 Z1100 etc. liner/std barrels needed

#3 PostAuthor: KWACKERZ1 » Fri Nov 10, 2017 3:55 pm

Julian yes actually your right its an 1100 sleeve we need its for Bobs Gpz.

Julian_Boolean
Custard Cream
Custard Cream
Posts: 804
Joined: 20th Oct 2016
Location: Ipswich

Re: GPZ11 Z1000J etc. liner/std barrels needed

#4 PostAuthor: Julian_Boolean » Fri Nov 10, 2017 3:58 pm

I assumed it was for Bob, I think MTC do 76mm pistons for 18mm gudgeon pins, I don't know if 76mm will be solve Bob's problem, if it's a 17mm gudgeon pin engine then MTC and Wiseco may do 76mm pistons, but the Wiseco ones might not fit J type engines.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

Re: GPZ11 Z1000J etc. liner/std barrels needed

#5 PostAuthor: KWACKERZ1 » Fri Nov 10, 2017 8:07 pm

its a unitrac so 18mm gudgeon pins.
But its the liners he needs desperately as he can source a new wiseco from the states.

User avatar
8 Valve Mark
Custard Cream
Custard Cream
Posts: 966
Joined: 3rd Nov 2016
Location: Glasgow, tropical west Scotland

Re: GPZ11 Z1000J etc. liner/std barrels needed

#6 PostAuthor: 8 Valve Mark » Sat Nov 11, 2017 9:34 am

hi kwacker,i could probably part with some 1089 barrels i have in storage (from z1100a shafty) if it would help you out.i believe theyre standard bore..im in glasgow but will post at cost but probably not till next week..let me know if they sound appealing and we'll sort the fine details out. ride safe mark. add phone number if poss

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1963
Joined: 1st Sep 2007
Location: Leicestershire

Re: GPZ11 Z1000J etc. liner/std barrels needed

#7 PostAuthor: KWACKERZ1 » Sun Nov 12, 2017 5:29 pm

Mark, that would be cool, just let us know when you can.

User avatar
8 Valve Mark
Custard Cream
Custard Cream
Posts: 966
Joined: 3rd Nov 2016
Location: Glasgow, tropical west Scotland

Re: GPZ11 Z1000J etc. liner/std barrels needed

#8 PostAuthor: 8 Valve Mark » Mon Nov 13, 2017 3:03 am

ok mate,I'll be in touch when i check them out.


Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 33 guests