Looking for a standard liner to replace one liner and 1170 piston that has damage to it.
Will consider anything with at least one standard size liner as it will be bored to 1170 anyway.
Can anyone help?
Also if anyone has an 1170 wiseco new high comp piston kicking about give us a shout.
Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GPZ11 Z1000J etc. liner/std barrels needed
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: GPZ11 Z1000J etc. liner/std barrels needed
Doesn't it have to be an 1100 barrel to be bored to 75mm, I don't think you can go that big with 1000J barrels.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: GPZ11 Z1100 etc. liner/std barrels needed
Julian yes actually your right its an 1100 sleeve we need its for Bobs Gpz.
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: GPZ11 Z1000J etc. liner/std barrels needed
I assumed it was for Bob, I think MTC do 76mm pistons for 18mm gudgeon pins, I don't know if 76mm will be solve Bob's problem, if it's a 17mm gudgeon pin engine then MTC and Wiseco may do 76mm pistons, but the Wiseco ones might not fit J type engines.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: GPZ11 Z1000J etc. liner/std barrels needed
its a unitrac so 18mm gudgeon pins.
But its the liners he needs desperately as he can source a new wiseco from the states.
But its the liners he needs desperately as he can source a new wiseco from the states.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: GPZ11 Z1000J etc. liner/std barrels needed
hi kwacker,i could probably part with some 1089 barrels i have in storage (from z1100a shafty) if it would help you out.i believe theyre standard bore..im in glasgow but will post at cost but probably not till next week..let me know if they sound appealing and we'll sort the fine details out. ride safe mark. add phone number if poss
Re: GPZ11 Z1000J etc. liner/std barrels needed
Mark, that would be cool, just let us know when you can.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: GPZ11 Z1000J etc. liner/std barrels needed
ok mate,I'll be in touch when i check them out.
Who is online
Users browsing this forum: No registered users and 53 guests