Hello. I’m after part number 42032-070
It’s the top hat spacer.
Thanks.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 A1 rear wheel spacer
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Regular Poster
- Posts: 16
- Joined: 3rd Feb 2013
- Location: MACCLESFIELD
Z1000 A1 rear wheel spacer
Beer and Sex and ChipsNGravy - It's all a Macc Lad needs.
Re: Z1000 A1 rear wheel spacer
i might have one....
-
- Regular Poster
- Posts: 16
- Joined: 3rd Feb 2013
- Location: MACCLESFIELD
Re: Z1000 A1 rear wheel spacer
No, but thank you. Appreciate your help with photo
It’s the spacer with one shoulder that sits on the sprocket side.
Cheers
It’s the spacer with one shoulder that sits on the sprocket side.
Cheers
Beer and Sex and ChipsNGravy - It's all a Macc Lad needs.
Re: Z1000 A1 rear wheel spacer
Ok Cheers...
-
- Regular Poster
- Posts: 16
- Joined: 3rd Feb 2013
- Location: MACCLESFIELD
Re: Z1000 A1 rear wheel spacer
Sorry... disc side.
The diagram in the z-Power booklet is misleading.
Spacers 4 And 24 are pictured wrong way round.
Better picture on cmsnl.com website.
The diagram in the z-Power booklet is misleading.
Spacers 4 And 24 are pictured wrong way round.
Better picture on cmsnl.com website.
Beer and Sex and ChipsNGravy - It's all a Macc Lad needs.
Re: Z1000 A1 rear wheel spacer
You may want to specify, wire wheels or alloys because I believe they are different sizes, I got the dimensions and had one made, it was easier. Good luck.
-
- Regular Poster
- Posts: 16
- Joined: 3rd Feb 2013
- Location: MACCLESFIELD
Re: Z1000 A1 rear wheel spacer
Good tip that Cheers for “helping the aged”
Wire wheels.
Wire wheels.
Beer and Sex and ChipsNGravy - It's all a Macc Lad needs.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z1000 A1 rear wheel spacer
i have a couple of top hat spacers of vague kawasaki origins,off hand 30mm end to end n 17mm inner diameter (STD kawasaki spindle size).i also have one like yellow offered n could be machined down to fit,it's maybe wider end to end but only by 3 or 4 mm,not sure as I'm in cloudy Spain so can't be exact. pm your details n I'll post you a couple to f'about with.. probably about next wed/Thurs.
-
- Regular Poster
- Posts: 16
- Joined: 3rd Feb 2013
- Location: MACCLESFIELD
Re: Z1000 A1 rear wheel spacer
Thanks for the offer Mark. Very helpful.
Managed to find and order a NOS one this morning whilst browsing over coffee.
Few nice little bits on full throttle projects.com
Thanks.
Managed to find and order a NOS one this morning whilst browsing over coffee.
Few nice little bits on full throttle projects.com
Thanks.
Beer and Sex and ChipsNGravy - It's all a Macc Lad needs.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z1000 A1 rear wheel spacer
good you sorted out mate. post up a pic n the dimensions incase my spare ones are of use to a fellow zhead...ride safe..
Who is online
Users browsing this forum: No registered users and 168 guests