I need a steel box section swingarm for my Triton project, has any body got anything? I think a Radian one may fit. It needs to be relatively short and twin shock compatible. Dimensions are roughly:
swingarm pivot to wheel spindle 370 - 425mm ish
inner faces at rear 240 - 265mm ish
inner shock mount faces 265mm
pivot faces are 276mm so anything less than that would be ok.
Cheers
Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Box Section Swingarm wanted
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Box Section Swingarm wanted
Hi mate hope you are well still tinkering!
Have texted you.
Have texted you.
Who is online
Users browsing this forum: No registered users and 105 guests