Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Out with the old and in with the even older! ('76 z900a5)
Out with the old and in with the even older! ('76 z900a5)
Went to pick up a '76 900a5 yesterday. I bought it back in early November and has taken and age to get here...
**edit** Frame number shows it to be an A5 and date stickers says 12/75.
Anyway, had a quick look over it last night and I am happy with it overall.
Not perfect but very, very tidy and appears to be all original.
Shows 8k miles on the clocks and judging by the condition could be correct.
Original exhausts!
Chrome and frame paint all there with little or no damage or rust
Full airbox and snorkel, toolkit & underseat manuals
Working hazard flasher and rear tail bulb failure indicator!
Tank paintwork a little faded and a few blemishes here and there
Carbs leaking fuel...
Running a bit rough and a one exhaust gasket blowing...
Small rip on the side of the seat cover (probably repair it as opposed to recover it)
I'll give it a proper inspection this week and post up a full set of photos. I'll then get stuck into doing anything that needs sorting. Suspect a full carb strip down will be one of the first things to do...
I've got a complete and original dual disc setup that can go on it. Just need to overhaul all the components.
The aim is to try and get it registered and on the road for the meet at Squires in June.
Excited is an understatement!
**edit** Frame number shows it to be an A5 and date stickers says 12/75.
Anyway, had a quick look over it last night and I am happy with it overall.
Not perfect but very, very tidy and appears to be all original.
Shows 8k miles on the clocks and judging by the condition could be correct.
Original exhausts!
Chrome and frame paint all there with little or no damage or rust
Full airbox and snorkel, toolkit & underseat manuals
Working hazard flasher and rear tail bulb failure indicator!
Tank paintwork a little faded and a few blemishes here and there
Carbs leaking fuel...
Running a bit rough and a one exhaust gasket blowing...
Small rip on the side of the seat cover (probably repair it as opposed to recover it)
I'll give it a proper inspection this week and post up a full set of photos. I'll then get stuck into doing anything that needs sorting. Suspect a full carb strip down will be one of the first things to do...
I've got a complete and original dual disc setup that can go on it. Just need to overhaul all the components.
The aim is to try and get it registered and on the road for the meet at Squires in June.
Excited is an understatement!
Last edited by Ultim8pc on Fri Jun 08, 2018 1:07 pm, edited 3 times in total.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Out with the old and in with the even older! ('76 z900a4)
Looking good, never liked the brown one at the time but it's grown on me, had one in the early 80's and promptly streetfightered it, murals, monoshock , mag wheels etc etc.
Z1b,
zxr750 m2,
zrx1200
Z1000j lawson race bike,
Versys 1000gt (2019),
Gsxr750H.
zxr750 m2,
zrx1200
Z1000j lawson race bike,
Versys 1000gt (2019),
Gsxr750H.
Re: Out with the old and in with the even older! ('76 z900a4)
floydsz1 wrote:Looking good, never liked the brown one at the time but it's grown on me, had one in the early 80's and promptly streetfightered it, murals, monoshock , mag wheels etc etc.
I prefer the green, but I'm not complaining..
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
- warren3200gt
- Hardcore
- Posts: 2767
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Out with the old and in with the even older! ('75 z900a5)
I didn't think A5's existed until late 76? Thought 75 year was Z1B and very early A4's?
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Out with the old and in with the even older! ('75 z900a5)
warren3200gt wrote:I didn't think A5's existed until late 76? Thought 75 year was Z1B and very early A4's?
You are correct, official records say the A5 started in '76.
The frame number is deffo A5, (Z1F-505xxx) but the date stamp on the white frame sticker says 12/75...
Wheel rims are stamped 5I (Sept '75) and 5G (July '75).
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Out with the old and in with the even older! ('75 z900a5)
Very nice too, what did that cost for shipping and duty?
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: Out with the old and in with the even older! ('75 z900a5)
DavidZ1R wrote:Very nice too, what did that cost for shipping and duty?
Thanks.
I normally budget £1500 for collection, delivery to port, shipping and VAT and it came within budget!
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Out with the old and in with the even older! ('75 z900a5)
Nice one Nigel
GPZ1100 A1 zrx1100 FDXWG GSA1250
Re: Out with the old and in with the even older! ('75 z900a5)
Nice one......shouldn't take much to get that looking lovely.
Re: Out with the old and in with the even older! ('75 z900a5)
Looks very nice and original with all the right bits. As above I never liked the Brown, but it's a real grower and actually looks fantastic in sunlight, the candy really pops.
Given that pretty much every A4 is the usual Diamond Dark Green I'd think the Brown will add Value.
Well Done.
Given that pretty much every A4 is the usual Diamond Dark Green I'd think the Brown will add Value.
Well Done.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: Out with the old and in with the even older! ('75 z900a5)
Hi Ultim8pc
stunning looking bike! Congratulations!
Let the good times roll !
GrtZ
Philippe
stunning looking bike! Congratulations!
Let the good times roll !
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
- damien.wrl
- 100Club
- Posts: 395
- Joined: 7th Feb 2018
- Location: Cornwall
Re: Out with the old and in with the even older! ('75 z900a5)
You are a lucky chap ... very nice
Re: Out with the old and in with the even older! ('75 z900a5)
Very nice indeed - i really like the Diamond Dark Brown A4 & A5's.
"Better to remain silent and be thought an idiot, than to open your mouth and remove any doubt" - Abraham Lincoln
Z900A4 / Hodna CBXZ / Ducati Diavel / H1F 500 Mongrel / CBXZ Project / RD400 project
Z900A4 / Hodna CBXZ / Ducati Diavel / H1F 500 Mongrel / CBXZ Project / RD400 project
Re: Out with the old and in with the even older! ('75 z900a5)
Cheers gents.
Been really busy so not had any time to do anything with it. Probably have some time tomorrow and give another report.
Been really busy so not had any time to do anything with it. Probably have some time tomorrow and give another report.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Out with the old and in with the even older! ('75 z900a5)
Managed to get a bit of time yesterday to drag it out of the garage, give it a bit of a clean up and see what it's like.
From what I know this bike was in a collection, was hardly ridden and was immaculate and then recently sold on and not looked after.
It's far better than the A5 I just sold. But with some issues...
From what I can see it's completely standard apart from the headlight unit.
Correctly stamped OEM exhausts (!) and rims.
Complete air box, toolkit and manuals.
Carbs are leaking and gummed up, doesn't run well. So first job will be to pull the carbs, clean them up, do what ever is necessary and set them up.
Chrome is generally very good, with no thinning. Some pitting here and there. However, the RH top silencer has some pitting which won't polish out. ;(
Paintwork is a bit faded, with a few decal dings here and there.
Engine is the grubbiest part of the bike, but should clean up nicely.
Frame paintwork is pretty much unblemished.
Seat has a rip.
Clocks, switchgear and controls are in a lovely condition.
Front wheel spokes are pretty good and the rears less so, but not rusty.
Overall, I'm happy so far, but annoyed about the exhausts....
Not sure I'll get much done on it in the next few weeks as I am rebuilding my workshop, but more updates as and when.
From what I know this bike was in a collection, was hardly ridden and was immaculate and then recently sold on and not looked after.
It's far better than the A5 I just sold. But with some issues...
From what I can see it's completely standard apart from the headlight unit.
Correctly stamped OEM exhausts (!) and rims.
Complete air box, toolkit and manuals.
Carbs are leaking and gummed up, doesn't run well. So first job will be to pull the carbs, clean them up, do what ever is necessary and set them up.
Chrome is generally very good, with no thinning. Some pitting here and there. However, the RH top silencer has some pitting which won't polish out. ;(
Paintwork is a bit faded, with a few decal dings here and there.
Engine is the grubbiest part of the bike, but should clean up nicely.
Frame paintwork is pretty much unblemished.
Seat has a rip.
Clocks, switchgear and controls are in a lovely condition.
Front wheel spokes are pretty good and the rears less so, but not rusty.
Overall, I'm happy so far, but annoyed about the exhausts....
Not sure I'll get much done on it in the next few weeks as I am rebuilding my workshop, but more updates as and when.
Last edited by Ultim8pc on Fri Jun 08, 2018 1:08 pm, edited 1 time in total.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Who is online
Users browsing this forum: Bing [Bot] and 14 guests