Hi all
I need a gpz1000rx r/h switch, or similar push/pull throttle for my elr to control the rs36 carbs.as the motion pro throttle hangs off the edge of the bars and is a long reach to switch controls. Any leads on a switch and whom can restore placcy switch's much appreciated.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GPz1000rx rh switch/throttle needed for elr
Moderators: paul doran, Taffus, KeithZ1R, chrisu
GPz1000rx rh switch/throttle needed for elr
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: GPz1000rx rh switch/throttle needed for elr
Thanks for the lead I bought it just hope it's push/pull and has lighting switch..
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: GPz1000rx rh switch/throttle needed for elr
swampy wrote:Thanks for the lead I bought it just hope it's push/pull and has lighting switch..
yes it has twin cables the same switch as a 1000rx apart from the wiring length
-
- 100Club
- Posts: 221
- Joined: 30th Nov 2007
- Location: leicester,uk
Re: GPz1000rx rh switch/throttle needed for elr
Got a GTR1000 one if any use?
drew
drew
Who is online
Users browsing this forum: Stevo1015 and 232 guests