Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
A4 Shim Lapping ?
Moderators: paul doran, Taffus, KeithZ1R, chrisu
A4 Shim Lapping ?
Anyone know if the stock shims are made of tool steel or simply case hardened? I have just 1 shim that needs about 0.03 - 0.05 mm lapped to bring it into spec so am thinking about some grinding paste on a piece of glass & lapping the underside.
Re: A4 Shim Lapping ?
Members get access to a "shim-swap" service
And on the 7th day... Zeds were created!
Re: A4 Shim Lapping ?
As Mark says,case hardened ,not a good idea to remove material or grind asking for trouble..
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Re: A4 Shim Lapping ?
lapping will be fine , you will only about 1 thou off each side , case hardening will be a lot deeper, probably 10- 15 thou per side
Who is online
Users browsing this forum: No registered users and 280 guests