Hi all
I've often seen and heard about switching the forks over to put the calipers behind, like they were on the A2 and later. But what about the little lug on the lh fork leg that stops the speedo gearbox rotating? Does it need something added to the rh fork leg to stop that or is it not a problem, ie it just stays put anyways?
Cheers
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Swapping the fork legs over on Z1000A1 to put the calipers behind
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Swapping the fork legs over on Z1000A1 to put the calipers behind
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)-
needaz1100r
- ZedHead
- Posts: 1129
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Re: Swapping the fork legs over on Z1000A1 to put the calipers behind
It will stay put anyway, it's clamped with the inner races of the bearings and if they rotate you have bigger problems than the speedo drive turning.
Cheers,
Mark.
Mark.
Re: Swapping the fork legs over on Z1000A1 to put the calipers behind
Cool, thanks!
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)Who is online
Users browsing this forum: No registered users and 72 guests