Hi, does anyone know the part no. or the size of the o'ring between the reservoir and the body of the rear master cylinder on the MK2?
Thanks in advance.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
MK2 rear master cylinder
Moderators: chrisu, paul doran, Taffus, KeithZ1R
MK2 rear master cylinder
mark burch
Re: MK2 rear master cylinder
Just a reminder for my previous question, any info greatly received, thanks
mark burch
Re: MK2 rear master cylinder
This is the Kawasaki diagram from CMSNL for an 1980 A4 Z1000. There appears not to be a separate part listed there.
AL
AL
1981 J1
Re: MK2 rear master cylinder
Hi shorty
the O-ring is not sold seperately by Kawasaki.
You'll have to find one or make one yourself.
It's a square O-ring, the outer diameter is 52 mm, the height is 2,85 mm and it has a width of 2,35 mm
Don't forget it has to be brake fluid resistant!
Good luck
GrtZ
Philippe
the O-ring is not sold seperately by Kawasaki.
You'll have to find one or make one yourself.
It's a square O-ring, the outer diameter is 52 mm, the height is 2,85 mm and it has a width of 2,35 mm
Don't forget it has to be brake fluid resistant!
Good luck
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Who is online
Users browsing this forum: Bing [Bot], DavidZ1R and 59 guests