Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Clock bracket foams
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Clock bracket foams
A few years ago I looked into getting accurate copies manufactured for the clock foams. I got a sample set made in sticky back EPDM foam. They were potentially an excellent alternative with perfect fit and sponginess but at the time they could only do 5mm thick which was too thick. I can now get these cut in 3mm EPDM but there is a MOQ of 25 sets if I proceed. I’d need to sell at £10 a set to cover the costs if anyone is interested.
Below are some images but bear in mind this was the 5mm thick sample. The first image is a 3D representation in 3mm.
Below are some images but bear in mind this was the 5mm thick sample. The first image is a 3D representation in 3mm.
You do not have the required permissions to view the files attached to this post.
Re: Clock bracket foams
I spent quite some time making templates and painstakingly cutting out my foam replacements back in April and could have really done with these then!
1978 Z1000A2
Previous Zeds:
1975 Z1B
1982 Z650F3
Previous Zeds:
1975 Z1B
1982 Z650F3
Re: Clock bracket foams
John,
I am interested. I want one set!
I am interested. I want one set!
Re: Clock bracket foams
I'd take at least 3 sets.
Cheers
Cheers
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Clock bracket foams
John , If there for a Z1 ,I will have a set please
Re: Clock bracket foams
marmck wrote:John , If there for a Z1 ,I will have a set please
Yes, they will do for Z1 to Z1B. I should point out that if you have the Z1A/B with the stop light in the tacho, you will need to make a simple scissor cut as below on one of the foams to allow the bulb holder to sit properly.
OK.....I'll get a batch made up and let anyone interested know when they arrive.
Cheers
John
You do not have the required permissions to view the files attached to this post.
Re: Clock bracket foams
Will they also fit the Z900 A4's?
Re: Clock bracket foams
sprint wrote:Will they also fit the Z900 A4's?
Sorry, I don't know. I've never had a Z900
Re: Clock bracket foams
I will buy a set please.
Re: Clock bracket foams
I’ll take a set
Re: Clock bracket foams
2 sets please
Re: Clock bracket foams
z2.john wrote:sprint wrote:Will they also fit the Z900 A4's?
Sorry, I don't know. I've never had a Z900
Can anybody advise if the seating platform for the instruments is the same or similar for the Z900 A4's?
Re: Clock bracket foams
I will have a set too please.
Adrian..adriannurney@hotmail.co.uk or 07952925336
Adrian..adriannurney@hotmail.co.uk or 07952925336
Re: Clock bracket foams
I will have a set please.
Re: Clock bracket foams
sprint wrote:z2.john wrote:sprint wrote:Will they also fit the Z900 A4's?
Sorry, I don't know. I've never had a Z900
Can anybody advise if the seating platform for the instruments is the same or similar for the Z900 A4's?
Looking at the photos of both the Z1 and Z900 A4 side by side they look to have identical/similar instrument mounting platforms? Though they do not seem to use the round pads?
So on that basis can you please reserve a set for me.
Thanks
Andy
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: SuffolkZ1r, zapo and 17 guests