Sorting through my boxes of surplus stuff I found these.
I think the speedo drive is from my Z650 B1, so the same as many other Zed ones. £15
The carb rubbers were fitted to my 1100 Unitrak to use Z1000J carbs, so I think must be 1000J rubbers (?, they're number 16065-1135, and i think 1000J are 1131s?), they're in mint condition with very good clamps. I've just seen some on ebay with the same numbers that are listed as Z1000/GPz1100... But ideal for anyone replacing the Unitrak fuel injection for carbs (which is what I had them for). New on ebay they're over twenty quid each, so how about £50 for the four, including the clamps.
And the exhaust clamps were used for an aftermarket 4-into-1 on the GPz11, but I don't know what make. £10
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Carb rubbers, exhaust clamps, speedo drive
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Carb rubbers, exhaust clamps, speedo drive
You do not have the required permissions to view the files attached to this post.
Z650/1100 turbo, GPz750 rolling resto, Z650 restomod
Who is online
Users browsing this forum: No registered users and 32 guests