I have a cover that came with a gpz1100b1 engine, but when you try to fit to the engine in the gpz1100 b1 frame, the lower right corner hits the frame. That corner is more square than a J or gpz one, also the gear lever pivot and mount are closer together than on the j I have had it ceracoated and new seals fitted, so i am abit miffed. Anyone have any ideas what it originally came off?
Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Front sprocket cover
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Front sprocket cover
Z1100R, RD 125LC, Zx7r , Endurance racer, zx4rr
-
8 Valve Mark
- Custard Cream
- Posts: 968
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Front sprocket cover
maybe a z1000 mk2 rob?
Re: Front sprocket cover
I will have a look.
Cheers Rob
Cheers Rob
Z1100R, RD 125LC, Zx7r , Endurance racer, zx4rr
Re: Front sprocket cover
It sounds like a Unitrak cover to me. The pic, I believe, is an 1100B cover. If the gear linkage hanger is directly below the gear position numbers as I’ve drawn and there’s the bit to the lower right corner, it could well be from an 1100A. If it is I would be interested in it. I have a couple of B covers if you want. Not as good as this one. But B covers are more common.
PM me if you’re interested.
- SprocketCover2.JPG (76.63 KiB) Viewed 2055 times
PM me if you’re interested.
A2 1979-80. A1 1980-now
Who is online
Users browsing this forum: No registered users and 25 guests