Hi men
as you know I restored a GPZ1100 B2 a few months ago. It has a Uni-Trac (ZX1100) engine.
A few weeks ago I was able to buy a B2 engine but the camshafts are missing.
I have two spare ZX camshafts.
I wonder if I could use the ZX1100 camshafts in the B2 head. The lobes of the ZX are approx. 0,65 mm higher and they have a ratio of 300 °. The cams of a B2 have a 288° ratio.
The B2 valves have shims above the buckets and the ZX valves have shims under the bucket.
If I could use the ZX camshafts in the B2 head I plan to swap the ZX engine in my B2 for the correct one.
Is there anyone who can give correct advice?
Thanks anyway
GrtZ
Philippe
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GPZ1100B2 camshafts
Moderators: chrisu, paul doran, Taffus, KeithZ1R
GPZ1100B2 camshafts
the differences between a little boy and an adult man is the price and size of their toys!
Re: GPZ1100B2 camshafts
You will have to clearance the bucket bores for the Unitrack cams in the B head but other than that there will be no issues with valve/piston clearance or using shim on top.
Re: GPZ1100B2 camshafts
Hi zed1015
thanks for your answer !
I allready mounted the ZX camshafts in the B2 head with their bearings and the cam lobes could pass across the bucket bores.
I'll check it again and I'll certainly keep your advice in my thoughts!
Many thanks, much appreciated!
GrtZ
Philippe
thanks for your answer !
I allready mounted the ZX camshafts in the B2 head with their bearings and the cam lobes could pass across the bucket bores.
I'll check it again and I'll certainly keep your advice in my thoughts!
Many thanks, much appreciated!
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: GPZ1100B2 camshafts
I have unitrac cams in one of my 1000a1's and they fitted ok with no issues, only problem was getting the APE cam sprockets to convert the later 2 bolt cams to the 3 bolt and different type of cam chain, APE only make them now and again so no stock anywhere
Z1b, z1000a1 x 2 , Aprilia v4 Tuono factory, SV1000
Re: GPZ1100B2 camshafts
Hi flateddie
thanks for the extra information! If they work in a Z head they will work in a Gpz head too.
Much appreciated
GrtZ
Philippe
thanks for the extra information! If they work in a Z head they will work in a Gpz head too.
Much appreciated
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!