Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Carb mixture screw thread size.

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
Gus
Hardcore
Hardcore
Posts: 1511
Joined: 17th Mar 2007
Location: Gloucestershire

Carb mixture screw thread size.

#1 PostAuthor: Gus » Wed Feb 24, 2021 9:40 pm

Evening Amigos.

I've managed to get a seized mixture screw out but still have some debris to clear out from the threads.

Once this is done I want to buy a tap to run down to clear any FOD.

Looking on the net I have seen thread measurements of M6x0.5 but also a dimension of a mixture screw thread of 5.9mm dia.

Would I be correct in thinking the tapped thread size is indeed 6x0.5 and the screw is merely 5.9 for clearance?

Thanks in advance.

Gus
"Set the GRINDER on it"
Top
kev edwards
Hardcore
Hardcore
Posts: 2148
Joined: 3rd Apr 2009
Location: leverington UK

Re: Carb mixture screw thread size.

#2 PostAuthor: kev edwards » Thu Feb 25, 2021 8:09 am

Is this pilot fuel screw (underneath front) or air (on the side)? if underneath fuel screw 5mm x0.5, don't buy cheap taps either.
Top
User avatar
Gus
Hardcore
Hardcore
Posts: 1511
Joined: 17th Mar 2007
Location: Gloucestershire

Re: Carb mixture screw thread size.

#3 PostAuthor: Gus » Thu Feb 25, 2021 9:35 am

Hi Kev.

Sorry they are CV carbs off a Suzuki 2001 - 2006 Bandit Mikuni BSR36.

I suppose I was thinking there were standard type thread sizes across carbs

Gus
"Set the GRINDER on it"
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 106 guests