Hi All,
I started reassembling the forks for the 1000r. I had taken photo's of just about every step of the disassembly... what could possibly go wrong?
Anyway there are two short springs, one about the same gauge as the long spring and the second one is lighter ( shown below the long spring). Does anyone know where this belongs. I have a feeling it slips into the heavy spring but am not sure, it may belong above or below it. Of course I didn't take a photo of that particular detail, 12 months ago it was obvious where it belonged!
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Fork reassembly
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Fork reassembly
- Attachments
-
Re: Fork reassembly
Thanks Al!
It looks like the lighter spring is on top to me!
P
It looks like the lighter spring is on top to me!
P
-
needaz1100r
- ZedHead
- Posts: 1129
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Re: Fork reassembly
Skid Mark wrote:Thanks Al!
It looks like the lighter spring is on top to me!
P
Can't see it making much of a difference.
Cheers,
Mark.
Mark.
Re: Fork reassembly
Can't see it making much of a difference.
Fair point.
Who is online
Users browsing this forum: No registered users and 46 guests