Hi All,
Ill soon to be doing a wheel change on my A1 from alloys to spokes and I’m looking for a rear sprocket carrier, Cush drive rubber and the outer spacers for the spoked wheel set up.
Can anyone help with these parts?
Regards.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000A1 Rear Sprocket Carrier
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Z1000A1 Rear Sprocket Carrier
Hi All,
Further to my earlier post, I’ve found all the bits I need except for one spacer.
I’m looking for part number 42032-070 which is the chain side spacer for a spoked wheel setup.
It’s the top hat shaped one and it should be about 31mm long overall.
Please can anyone help with a good used one?
I can’t get my wheels on without it!
Cheers.
Further to my earlier post, I’ve found all the bits I need except for one spacer.
I’m looking for part number 42032-070 which is the chain side spacer for a spoked wheel setup.
It’s the top hat shaped one and it should be about 31mm long overall.
Please can anyone help with a good used one?
I can’t get my wheels on without it!
Cheers.
Who is online
Users browsing this forum: dazzler and 43 guests