Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
De glaze
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
DeadZedDave
- 100Club
- Posts: 249
- Joined: 1st Nov 2021
- Location: Newcastle
Re: De glaze
For De - Glazing CYLINDER BORES I used a tool called Flex Hone.
I've never heard of a "liquid" to do this job (but that means nothing !)
It sounds like a good option. HOWEVER, I'd be inclined to check with Millers before you use it with a roller bearing crank in a Zed. Also, its only 20w. I would not want to run such a light viscosity oil in a Zed motor - not even for a short time.
I've never heard of a "liquid" to do this job (but that means nothing !)
It sounds like a good option. HOWEVER, I'd be inclined to check with Millers before you use it with a roller bearing crank in a Zed. Also, its only 20w. I would not want to run such a light viscosity oil in a Zed motor - not even for a short time.
Re: De glaze
Unsure what you are trying to do. De-glazing normally refers to the cylinder bore, using a hone tool.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: De glaze
Looks like 'running-in' oil to me, used to use it for the first fill in a rebuilt engine back in my Mini days.
Who is online
Users browsing this forum: No registered users and 16 guests