Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
flickering oil light
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
RALPHARAMA
- Area Rep.
- Posts: 2752
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Oil pressure is pretty low on Zeds at the best of times. I would be concerned about an oil light and wouldn't ride it until the villain of the peace is identified. Taking the pump off is no biggy, just take your time and be methodical. Ensure you have a real manual, a torque wrench, fresh sump gasket, big 'o' ring and some Wellseal to seal it up. They so often weep without Wellseal.
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Who is online
Users browsing this forum: No registered users and 51 guests