Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Offset gearbox sprocket
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Offset gearbox sprocket
Thanks so much for taking the time to fully explain Rob, appreciated. I think I'm going to need the outrigger due to power.
Re: Offset gearbox sprocket
Scott have pm ‘d you.
This could be an option if you dont need the bearing support
This could be an option if you dont need the bearing support
Re: Offset gearbox sprocket
Thanks Phil, I’m sure I’m going to need the support though with the bearing.
Re: Offset gearbox sprocket
Phil, i have no PM, gone somewhere else perhaps?
Re: Offset gearbox sprocket
Looks like it disappeared, dont worry it was me prattling on about the sprockets below before I found the info but if you need a bearing support one its irrelevant.
Suppose if you are running a 6" rear you might need one.
Suppose if you are running a 6" rear you might need one.
Re: Offset gearbox sprocket
Received mine from VVM racing yesterday. He can supply the bearings as well if you want..
Looks great!
Looks great!
Re: Offset gearbox sprocket
Nice, I’ve ordered mine too.
Re: Offset gearbox sprocket
Similar set up to you Scott. I bought a120 chain which is only just long enough.
In hindsight I would have bought longer.
In hindsight I would have bought longer.
Asphalt Cowboy Z1100R, 1981 Z1000J
Re: Offset gearbox sprocket
120 link chain arrived today
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: Offset gearbox sprocket
tlc wrote:In hindsight I would have bought longer.
It'll stretch!
Re: Offset gearbox sprocket
I got my 18t 5/8 offset front from Debben a couple of years ago now though
Z1b, z1000a1 x 2 , Aprilia v4 Tuono factory, SV1000
Re: Offset gearbox sprocket
Math, how long did VVM Racing take with your sprocket? I paid them over a month ago and still no sprocket....two weeks ago they said it was in the post....still no sprocket.... fear that i'm being told a load of bollocks.
Re: Offset gearbox sprocket
scott wrote:Math, how long did VVM Racing take with your sprocket? I paid them over a month ago and still no sprocket....two weeks ago they said it was in the post....still no sprocket.... fear that i'm being told a load of bollocks.
It took a while, my first one was finished in a couple of days, postage took more than 2 weeks. Rotterdam-Maastricht normally is 1 day delivery. His story checked out as he sent me tracking and tracing number. My second order took less than a week, was posted last wednesday but still not here. So going to ask for the t&t number again. My experience from last 6 months is that posting packages , no matter who and where, results in long shipping times. Just ask t&t details. Good luck ;)
Ps: Last ebay package I received from the UK took over 4 weeks ...
Last edited by Mathh on Tue Mar 05, 2019 8:57 am, edited 1 time in total.
Re: Offset gearbox sprocket
Thanks Math, i'll pester them for the t+t numbers.
Re: Offset gearbox sprocket
Just had mine dyno’d at 132 hp.
No outrigger bearing fitted but I am on a 160 tyre.
No outrigger bearing fitted but I am on a 160 tyre.
Asphalt Cowboy Z1100R, 1981 Z1000J
Who is online
Users browsing this forum: No registered users and 161 guests