Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Out with the old and in with the even older! ('76 z900a5)

Post pictures of your bikes without having to pull them to bits to qualify for Projects. Club eligible Z based bikes only please, anything else should be in the bottom shed.
Please use it wisely and be respectful of other peoples' pride and joy....
Message
Author
User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 5301
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

Re: Out with the old and in with the even older! ('75 z900a5)

#31 PostAuthor: Ginger Bear » Sat Apr 21, 2018 6:00 am

Bike looks amazing, they don't come much more original than that.
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016

deka
100Club
100Club
Posts: 112
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: Out with the old and in with the even older! ('75 z900a5)

#32 PostAuthor: deka » Sat Apr 21, 2018 8:05 am

Save the air from the tyres their are people on eBay who will buy it if the prices for a feeler gauge is anything to go by. :D :lol:
kz900 c
bmwr1200gsa
955i daytona

User avatar
paul doran
Area Rep.
Area Rep.
Posts: 8285
Joined: 24th Sep 2004
Location: near Dublin Ireland

Re: Out with the old and in with the even older! ('75 z900a5)

#33 PostAuthor: paul doran » Sun Apr 22, 2018 3:35 am

I believe there are People out there would try to buy the air if possible
way too many Zeds

User avatar
Ultim8pc
100Club
100Club
Posts: 492
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Out with the old and in with the even older! ('76 z900a5)

#34 PostAuthor: Ultim8pc » Tue Apr 24, 2018 7:12 pm

Been cleaning the rear end and frame up. All painstaking work but worth the effort.
Pretty much ready to clean up the rear of the engine and centre stand next.

Battery box
Image

Image

Electrics plate
Image

Inner mudguard
Image
http://www.airevalleyclassics.co.uk
z900a4
z1000a1 (In bits)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r

deka
100Club
100Club
Posts: 112
Joined: 20th Feb 2018
Location: Newcastle upon tyne

Re: Out with the old and in with the even older! ('76 z900a5)

#35 PostAuthor: deka » Tue Apr 24, 2018 7:16 pm

Sweet :luv
kz900 c
bmwr1200gsa
955i daytona

User avatar
glav666
100Club
100Club
Posts: 126
Joined: 15th Nov 2012
Location: Belfast

Re: Out with the old and in with the even older! ('76 z900a5)

#36 PostAuthor: glav666 » Tue Apr 24, 2018 8:04 pm

They get much cleaner than that unrestored, nice find.
Z900A4, Triumph Explorer, Harley Fatboy special 1690, RD350LC, GPZ750 Unitrac

User avatar
damien.wrl
100Club
100Club
Posts: 148
Joined: 7th Feb 2018
Location: Cornwall

Re: Out with the old and in with the even older! ('76 z900a5)

#37 PostAuthor: damien.wrl » Tue Apr 24, 2018 8:42 pm

Lots of restored beauts , very few original survivors as good as this will be

User avatar
Ultim8pc
100Club
100Club
Posts: 492
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Out with the old and in with the even older! ('76 z900a5)

#38 PostAuthor: Ultim8pc » Thu Apr 26, 2018 9:25 pm

Made a start on cleaning up the engine today.

Not bad behind here, but looks like it has never been cleaned as the chain gunk was solid...
Image

Image

Bit of grot.
Image

Not much left of the rear to do.
Image

Not bad after the first pass!
Image

Clutch side came up well.
Image

And the rear is now clean. (Lower frame area still to do).
Image

Couldn't be bothered to remove the front sprocket to get the chain off and clean behind it. The grot behind the sprocket will annoy me, so I'll probably end up taking if off later to get that out.
Image
Last edited by Ultim8pc on Mon Apr 30, 2018 6:32 pm, edited 1 time in total.
http://www.airevalleyclassics.co.uk
z900a4
z1000a1 (In bits)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r

User avatar
Ultim8pc
100Club
100Club
Posts: 492
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Out with the old and in with the even older! ('76 z900a5)

#39 PostAuthor: Ultim8pc » Mon Apr 30, 2018 2:43 pm

Starting to put the backend and frame components back together.
Image
http://www.airevalleyclassics.co.uk
z900a4
z1000a1 (In bits)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r

Russ
Regular Poster
Posts: 24
Joined: 6th Mar 2018
Location: North Wales

Re: Out with the old and in with the even older! ('76 z900a5)

#40 PostAuthor: Russ » Mon Apr 30, 2018 5:16 pm

Very nice :D

User avatar
Ultim8pc
100Club
100Club
Posts: 492
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Out with the old and in with the even older! ('76 z900a5)

#41 PostAuthor: Ultim8pc » Thu May 03, 2018 9:59 am

Needed to clean up and check the rear drive hub, took a bit of effort with the sprocket fitted.

More dried up grease...
Image

Cleaned up reasonably well, however, I decided that the as the sprocket is starting to get a bit hooked and the drive chain is near the stretch limit , I'd best replace them.
Image

Great news, I have a new set of sprockets (correct Euro spec. of 15 front and 33 rear) and a nice O-ring chain in my stash!
Image

I need to order the front and rear sprocket tab washers to fit the new chain and sprockets, so decided to refit the rear wheel for now.
Image

I ordered some aftermarket air filters from M&P and they sent me the wrong ones (for a z1000). Had some hassle with getting them to take them back, but it's in hand now.
However, managed to pick up a 'NOS', boxed K&N filter for £10 on EBay though.

Next job is to get the front end off and check the front wheel and head stock bearings as I'm sure the grease will be dried up.
http://www.airevalleyclassics.co.uk
z900a4
z1000a1 (In bits)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r

User avatar
Ultim8pc
100Club
100Club
Posts: 492
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: Out with the old and in with the even older! ('76 z900a5)

#42 PostAuthor: Ultim8pc » Tue May 08, 2018 10:13 pm

Been pretty busy riding bikes instead of fettling them, so not much progress.
However, I did remove the cam cover and measure the valve clearances.
5 are spot on middle of range at .06 to .07mm and I have 3 that are .1 to .11mm. So I'll need to swap out the shims on those ones.

As expected the top end is mega clean.
Image

Cam damper rubbers on cam sprockets have virtually no wear. :D
Image
http://www.airevalleyclassics.co.uk
z900a4
z1000a1 (In bits)
z1000ST (in bits)
z1000Ltd (Project)
ZRX1200r


Return to “Show us Yours”

Who is online

Users browsing this forum: No registered users and 0 guests