Hello all, My Z1000 currently has a Marshall four into one on it and the main jets are #110. The bike has been standing for 20 years so I'm going get the carbs sorted and see how she runs out of interest on the Marshall. I have however sourced a set of Busso's (prefer the original look) and wondered what main jets folks with these exhausts are using? I am thinking that I should start with standard jets at #107.5 and take it from there, but if anyone has any experience on the jets that would be much appreciated!
Paul
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Main Jets for Busso Z1000A1?
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Main Jets for Busso Z1000A1?
The Busso pipes are replica's of the originals so the standard Jets shouldn't be a million miles away.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: Main Jets for Busso Z1000A1?
Thanks Garry, that's what I'm thinking. Jets not to expensive so will start with stock and take it from there.
Paul
Paul
Re: Main Jets for Busso Z1000A1?
Busso exhausts are designed for stock jetting.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Who is online
Users browsing this forum: No registered users and 68 guests