Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
idle adjust strip down
idle adjust strip down
can this be striped down further to me looks like i should be able unwind the adjuster out pass the threads and remove ? but meet stiff resistance before i can get it near the end of the threaded part
-
warren3200gt
- Hardcore
- Posts: 3053
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: idle adjust strip down
Yes, should be able to just unscrew it (anti clockwise) and the idle adjuster shaft and spring will come free.
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: idle adjust strip down
the threaded section at the top has probably been exposed for decades, so the threads have rusted a bit. Screw it clockwise 3 or 4 turns , to bring the rusty area up then wire brush the upper threads , then screw it out anticlockwise a bit at a time with WD40
gray
Who is online
Users browsing this forum: No registered users and 31 guests