Z1000h cylinderhead, throttlebodies and efi.

[Yngve]

[image][/image]I am selling a set of throttlebodies, wiringloom and cylinderhead.
Not the bodywork ( at this time ). I can upload more pictures if anybody is interested
The cylinderhead is with injectors. I can test them using my injectortester and aslo clean them. The head has spitted one shim on one exhaust( #3) but it has been welded and I dont think anybody will notice it at first glanze but its not pristine. One intake valve look dogey on top... It needs replacing. thow wiringloom look like a mess but I have been toold that it did work back in the 80s... The owner used the frame to build a Z1R clone ( ??+ %%V&&%C ? ) ..... thats why he took everything apart and it has been in storage since 85 ? 1000 euro as starting point. I also have the airbox . Again the bodywork is NOT included

[Z1streetfighter71]

Have you got a price in mind?

[Yngve]

Took another look at the head and Even though all valves did not leak I would have replaced them all. The exhaust valves were sinked deep into the head. Dont know if this was normal on h heads.

[Yngve]

Have you got a price in mind?

I know that this is rare as Hens teeth but at the same time I dont have any use for it. I bought it for the bodywork and got the head and efi as part of the deal. Make me an offer. ( ps… I there is one efi on sale on eBay. I will sell this set for less money

[zed1015]

You need to state a price or the post will be removed.

[paul doran]

You need to state a price or the post will be removed.

Correct price please or add will be removed thank You

[r3sc]

Isn’t the €1000 in his original post the price? (Euros)

[Yngve]

I have edited the first post but since I dont know the asking price for something like this I just put down a number I am very comfortable with. I might be too high or to low but I will nor give it away. If it doesnt sell as is then I will put on new valves/guides (if needed) and make it as new as possible and put it on the shelf

[rpeters]

Where the rest of the wiring loom, that looks like only the main loom, wheres the injection loom?

[Yngve]

Where the rest of the wiring loom, that looks like only the main loom, wheres the injection loom?

I hope to get it in a few weeks time. The seller said that he could not find everything because it was stored in several different places. I also miss the main airbox ( I only have the secondary ). I have looked some more at the head and I think I will take it apart to see if there is any other damage than the valves have been sunk too deep into the head... dont know the reason... Lucily I have a complete machine shop all by myself The seller also said that he should have the crankase and the crank also. As I have learned the crankcase are quite rare... I will update when and if I get more knowledge. The asking price is ofcorse just a starting point