Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
SOLD z1000a1 swinging arm
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
SOLD z1000a1 swinging arm
newly powder coated in gloss black, with chain adjuster blocks too, new bearings, n new axle sleeve £120.00 delivered to uk address.pm for anymore info or photos. cheers mark
Last edited by 8 Valve Mark on Fri Feb 01, 2019 3:29 pm, edited 1 time in total.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: z1000a1 swinging arm
bump! reduced to £110.00 cheaper than the the sum of the parts n work involved.. m
Re: z1000a1 swinging arm
Hi . new to this forum...Im interested in the swinging arm. my bike is a 1978 z1000 but has the old type bearing arrangement with solid bushes/bearing and not needle bearing. does yr arm come with the swing arm spindle and if so could you let me know it diameter . many thanks Rob.
have attached a piccy out of the haynes manual showing what it looks like
have attached a piccy out of the haynes manual showing what it looks like
You do not have the required permissions to view the files attached to this post.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: z1000a1 swinging arm
that's a z1-z900 swing arm for rear drum brake rob! has your bike been modified? the standard spindle is 16mm, i might have a spare one.
Re: z1000a1 swinging arm
Hi. Dont know the history but it has been modified in places. I thought it was off an older bike. The spindle I have is 16mm tho worn. it is running a rear disc.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: z1000a1 swinging arm
i have a spare spindle you can have. pm if interested. cheers m
Re: z1000a1 swinging arm
u648216 wrote:Hi. Dont know the history but it has been modified in places. I thought it was off an older bike. The spindle I have is 16mm tho worn. it is running a rear disc.
All the spindles on the chain drive 900/1015 motor bike are "16"mm.
Are you sure yours is worn as they are actually undersize at 15.8mm and the frame oversize at 16.2mm resulting in a bit of a loose fit.
Who is online
Users browsing this forum: No registered users and 109 guests