Hi,
In urgent need of one or more exhaust cam caps. Could get away with just the one numbered one or three. My number one has been installed the wrong way around at sometime and the camshaft is floating. Why I don't know! Now allowing the cam to move over and catch.
Please PM or call on 07511801197
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wanted Cam Caps-Z1or Z900
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Wanted Cam Caps-Z1or Z900
Last edited by PJONO on Mon Jul 31, 2023 6:39 pm, edited 4 times in total.
-
- Hardcore
- Posts: 1357
- Joined: 18th Jul 2008
- Location: Derbyshire/London
Re: Wanted Cam Caps-Z1or Z900
I assume you know these items were line bored thus matched to the head.
Regards
Steve
Regards
Steve
Re: Wanted Cam Caps-Z1or Z900
Hi Steve,
Yes, I appreciate they were, but I've little option other than to adapt one to check the cam end float which is catching. I may try and repair the damaged one.
Yes, I appreciate they were, but I've little option other than to adapt one to check the cam end float which is catching. I may try and repair the damaged one.
Re: Wanted Cam Caps-Z1or Z900
Hi PJONO
There are different cam caps in the Z1-Z900 series...they change nearly every year of production. It's very important that you have the correct cam caps so that they align . As stated before by Steve: they were line bored with the head!
You may be lucky finding cam caps that fit your cylinder head but take care.
Have you tried to use new camshaft shells? This might solve your problem.
I hope you find a solution!
GrtZ
Philippe
There are different cam caps in the Z1-Z900 series...they change nearly every year of production. It's very important that you have the correct cam caps so that they align . As stated before by Steve: they were line bored with the head!
You may be lucky finding cam caps that fit your cylinder head but take care.
Have you tried to use new camshaft shells? This might solve your problem.
I hope you find a solution!
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Wanted Cam Caps-Z1or Z900
yes I might try new shells. Cant hurt
Who is online
Users browsing this forum: No registered users and 36 guests