Anyone have a single cam cap floating about Ideally number 1. Any will do. Appreciate these were line bored etc.etc. Had good success in altering in the past. Need to adapt one to fit an old head I have to make it serviceable.
P
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wanted- Cam Cap
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Wanted- Cam Cap
Hi, you can only use numbers 1 or 3 caps in the 1 position as these are slightly different to 2 and 4 as they control cam end float .
If it was a 2 or 4 you had to replace you could use any.
If it was a 2 or 4 you had to replace you could use any.
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Wanted- Cam Cap
Will look in the parts bin Friday to see what i have, will let you know one way or another.
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Wanted- Cam Cap
You have mail P.
Re: Wanted- Cam Cap
Kev,
Have responded. Thanks
P
Have responded. Thanks
P
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: Wanted- Cam Cap
Did you get this sorted?
Who is online
Users browsing this forum: No registered users and 48 guests